Table 1-2. Supplemental Characteristics (continued)
Fuse: The ac input is protected by a fuse located in a module on the rear panel; 0.5AM for l00/120 Vac input; 0.25AM for 220/240 Vac input.
Maximum VA: 60
Peak Inrush Current: 2.5 A (typical)
PROGRAMMABLE SLEW RATE: (For any given input transition, the time required will be either the total slew time or a minimum transition time, whichever is larger. The minimum transition time increases when operating with input currents under 1 AM (6060B) or 0.2 AM (6063B) and decreases with input currents over 20 A (6060B) or 2 A (6063B). The following are typical values; ± 25% tolerance.)
Current Slew Rate:
Model 6060B (Ac performance specified from 3 to 60 V)
Rate # | High Range Step | Low Range Step | Transition Time | |
1 | 1 A/ms | 0.1 A/ms | 8.0 ms | |
2 | 2.5 A/ms | 0.25 A/ms | 3.2 ms | |
3 | 5 A/ms | 0.5 A/ms | 1.6 ms | |
4 | 10 A/ms | 1 A/ms | 800 μs | |
5 | 25 A/ms | 2.5 A/ms | 320 μs | |
6 | 50 A/ms | 5 A/ms | 160 μs | |
7 | 0.1 | A/μs | 10 A/ms | 80 μs |
8 | 0.25 | A/μs | 25 A/ms | 32 μs |
9 | 0.5 | A/μs | 50 A/ms | 16 μs |
10 | 1 | A/μs | 0.1 A/μs | 12 μs |
11 | 2.5 | A/μs | 0.25 A/μs | 12 μs |
12 | 5 | A/μs | 0.5 A/μs | 12 μs |
Model 6063B (Ac performance specified from 3 to 240 V)
Rate # | High Range Step | Low Range Step | Transition Time | ||
1 | 0.17 | A/ms | 17 | A/s | 8.0 ms |
2 | 0.42 | A/ms | 42 | A/s | 3.2 ms |
3 | 0.83 | A/ms | 83 | A/s | 1.6 ms |
4 | 1.7 A/ms | 0.17 | A/ms | 800 μs | |
5 | 4.2 A/ms | 0.42 | A/ms | 320 μs | |
6 | 8.3 A/ms | 0.83 | A/ms | 160 μs | |
7 | 17 | A/ms | 1.7 A/ms | 80 μs | |
8 | 42 | A/ms | 4.2 A/ms | 32 μs | |
9 | 83 | A/ms | 8.3 A/ms | 20 μs | |
10 | 0.17 | A/μs | 17 A/ms | 20 μs | |
11 | 0.42 | A/μs | 42 A/ms | 16 μs | |
12 | 0.83 | A/μs | 83 | A/ms | 16 μs |
|
|
|
|
|
|
