Agilent Technologies 5951-2826, 5951-2827 manual Maximum Readback Capability, Bandwidth

Table 1-2. Supplemental Characteristics (continued)

	6060B	6063B
VOLTAGE READBACK
Resolution:	17 mV (via GPIB)	67 mV (via GPIB)
	20 mV (front panel)	100 mV (front panel)
Temperature Coefficient:	50 ppm/°C ± 1.2 mV/°C	100 ppm/°C ± 8 mV/°C
Maximum Readback Capability:	65 to 70 V (typical)	260 V (typical)
EXTERNAL ANALOG PROGRAMMING	(0 to 10 Vdc or 0 to 10 Vac)
Bandwidth:	10 kHz (3 db frequency)
Accuracy
Low Current Range:	± 4.5% ± 75 mA	± 3% ± 10 mA
High Current Range:	± 4.5% ± 250 mA	± 3% ± 20 mA
Voltage Range:	± 0.8% ± 200 mV	± 0.5% ± 150 mV
Temperature Coefficient
Current Range:	100 ppm/° ± 6 mA/°C	150 ppm/°C ± 1 mA/°C
Voltage Range:	100 ppm/°C ± 1 mV/°C	120 ppm/°C ± 10 mV/°C
EXTERNAL CURRENT MONITOR (0 TO 10 V):
Accuracy	± 4% ± 85 mA*	± 3% ± 10 mA*
Temperature Coefficient	50 ppm/°C ± 6 mA/°C	100 ppm/°C ± 1 mA/°C
*referenced to Analog Common
EXTERNAL VOLTAGE MONITOR (0 TO 10 V):
Accuracy	± 0.25% ± 40 mV*	0.4% ± 240 mV*
Temperature Coefficient	50 ppm/°C ± 0.2 mV/°C	70 ppm/°C ±1.2 mV/°C
*referenced to Analog Common
MAXIMUM INPUT LEVELS
Current:	61.2 A*	10.2 A*
Voltage:	75 V	250 V
*programmable to lower limits.

DC FLOATING VOLTAGE (DC ISOLATION):

± 240 Vdc between + or - input binding post and chassis ground

DIGITAL INPUTS

	Vlo: 0.9 V maximum at Ilo = -1 mA
	Vhi: 3.15 V minimum (pull-up resistor on input)
DIGITAL OUTPUTS
	Vlo: 0.72 V maximum at Ilo = 1 mA
	Vhi: 4.4 V maximum at Ilo = -20 μA
INPUT CURRENT:	100 Vac - 400 mA
	120 Vac - 350 mA
	220 Vac - 200 mA
	240 Vac - 180 mA

14 General Information