SAFETY SIGN CARE
•Keep safety signs clean and legible at all times.
•Replace safety signs that are missing or have become illegible.
•Replacement parts that displayed a safety sign should also display current sign.
•Safety signs are available from your distributor, dealer parts department, or manufacturer.
How to install safety signs:
•Be sure installation area is clean and dry.
•Decide on exact position before you remove backing paper.
•Remove smallest portion of split backing paper.
•Align decal over specified area and carefully press small portion with exposed sticky backing in place.
•Slowly peel back remaining paper and carefully smooth remaining portion of decal into place.
•Small air pockets can be pierced with a pin and smoothed out using piece of decal backing paper.
TIRE SAFETY
•Failure to follow proper procedures when mounting tire on rim can produce an explosion resulting in serious injury or death.
•Do not attempt to mount tire unless you have proper equipment and experience.
•Inflating or servicing tires can be dangerous. Whenever possible, trained personnel should be called to service or mount tires.
•Always order and install tires and wheels with appropriate type and load capacity to meet or exceed anticipated weight to be placed on sprayer.
REMEMBER
Your best assurance against accidents is a careful and responsible operator. If there is any portion of this manual or function you do not understand, contact your local authorized dealer or manufacturer.
BEFORE OPERATION:
•Carefully study and understand this manual.
•Do not wear
•Always wear protective clothing and substantial shoes.
•It is recommended that suitable hearing and eye protection be worn.
•Operator may come in contact with certain materials which may require specific safety equipment relative to handling of such materials. (Examples: extremely dusty, molds, fungus, bulk fertilizers, etc.)
Page 8
