!
!
SAFETY SIGN CARE
•Keep safety signs clean and legible at all times.
•Replace safety signs that are missing or have become illegible.
•Replaced parts that displayed a safety sign should also display the current sign.
•Safety signs are available from your distributor, dealer parts department, or the factory.
How to install safety signs:
•Be sure that the installation area is clean and dry.
•Decide on the exact position before you remove the backing paper.
•Remove the smallest portion of the split backing paper.
•Align the decal over the specified area and carefully press the small portion with the exposed sticky backing in place.
•Slowly peel back the remaining paper and carefully smooth the remaining portion of the decal into place.
•Small air pockets can be pierced with a pin and smoothed out using the piece of decal backing paper.
TIRE SAFETY
•Failure to follow proper procedures when mounting a tire on a rim can produce an explosion which may result in a serious injury or death.
•Do not attempt to mount a tire unless you have the proper equipment and experience to do the job.
•Inflating or servicing tires can be dangerous. Whenever possible, trained personnel should be called to service and/or mount tires.
•Always order and install tires and wheels with appropriate capacity to meet or exceed the anticipated weight to be placed on the equipment.
!REMEMBER
Your best assurance against accidents is a careful and responsible operator. If there is any portion of this manual or function you do not understand, contact your local authorized dealer or the manufacturer.
Page 9
