seconds and the red indicator light will illuminate. The clock will begin to count down.
4.When setting the time to 0, the electric timer will return to the clock mode automatically. The maximum steaming time is 90 minutes.
5.When steaming, press the +/- button to change the set time. Press the On/Off to stop the steam process. The display will return back to clock mode.
4
Timing The Steam Mode:
1.Press the “Program” button. “Prog” will appear on the upper left of the display.
2.Set the time by pressing the +/- button. The time will increase and decrease in 10 minute intervals.
3.Press the “Program” button until the display shows 45. Press the +/- button to adjust the steaming time.
4.Press the “Program” button again. The display will show the time and “Prog”. This indicates the start of the timing steam mode.
5.When the start time is reached, the unit will sound, the red indictor light will illuminate and the steamer will begin to steam.
6.If you want to cancel the timing steam mode, press the “Program” button. This will return the unit back to the clock mode.
At the end of steaming:
1.The steamer will automatically go into a hold mode after the steaming time is finished.
2.The display will show the time and a holding symbol in the lower left corner. The green indicator light will illuminate.
3.The hold mode will warm for 2 minutes every 8 minutes, after the unit stops steaming.
4.To cancel the hold mode, press the On/Off button. The display will return to the clock mode.
