
Getting Started Connections Setup Playback Remote Control Multi-zone Information Troubleshooting Specifications
d Source Delete
Remove input sources that are not used from the display.
[Selectable items]
ON : Use this source.
Delete : Do not use this source.
f On-Screen Display
Make on-screen display related settings.
NOTE
• Input sources being used in the various zones cannot be deleted.
• Input sources set to “Delete” cannot be selected using SOURCE
SELECT.

Text

Input source and mode display.
[Selectable items]
ON : Turn display on.
OFF : Turn display off.

Screensaver

Make screensaver settings.
Use the screensaver to prevent burn-in on the monitor screen.
When set to “ON”, the screensaver is activated if there is no activity
for about 3 minutes.
[Selectable items]
ON : Activate the screensaver if there is no activity for about 3
minutes.
OFF : Turn the screensaver function off.
Default
Reset the settings to the default values.
When “Screensaver” is set to “ON” , the screensaver is activated if
no operation is performed for about 3 minutes.
When you press uio p, the screensaver is cancelled and the
screen before that screensaver started is displayed.

Master Volume

Master volume display during adjustment.
[Selectable items]
ON : Turn display on.
OFF : Turn display off.

Tuner Information

This sets the time the on-screen display is displayed when a tuner
operation is performed.
[Selectable items]
Always : Show display continuously.
30sec : Show display for 30 seconds after operation.
10sec : Show display for 10 seconds after operation.
OFF : Turn display off.

Display Mode

Select the on-screen display’s display mode.
[Selectable items]
Mode1 : If there is no video signal, flickering of the on-screen
display is not prevented.
Mode2 : Prevents flickering of the on-screen display when there is
no video signal.
Use this mode if the on-screen display does not appear
in the Mode 1, as may happen according to the TV being
used.

iPod Information

This sets the time the on-screen display is displayed when an iPod
operation is performed.
[Selectable items]
Always : Show display continuously.
30sec : Show display for 30 seconds after operation.
10sec : Show display for 10 seconds after operation.
OFF : Turn display off.
Setup
For details, see “Amp Assign / Multi-zone Connections and Operations”
(vpage 65, 66).
s Volume Control
Set the MAIN ZONE volume setting.

Volume Limit

Make a setting for maximum volume.
[Selectable items]
OFF : Do not set a maximum volume.
–20dB : Set the maximum volume to –20 dB.
–10dB : Set the maximum volume to –10 dB.
0dB : Set the maximum volume to 0 dB.

Power On Level

This sets the volume set when the MAIN ZONE’s power is turned
on.
[Selectable items]
Last : Use the memorized setting from the last session.
– – – : Always use the muting on condition when power
is turned on.
[Variable range]
–80dB ~ +18dB : Set the volume level when the power is turned on
in units of 1 dB.

Mute Level

This sets the amount of attenuation of the volume when the mute
mode is set in the MAIN ZONE.
[Selectable items]
Full : The sound is cut off entirely.
–40dB : The sound is attenuated by 40 dB.
–20dB : The sound is attenuated by 20 dB.
For details on how to select, set and cancel settings for each menu, see “Menu Operations” (vpage 20).