
Getting Started Connections Setup Playback Remote Control Multi-zone Information Troubleshooting Specifi cations
[SOURCE
SELECT]
INPUT MODE
Recording on an External Equipment
(REC OUT mode)
You can listen to one program source while recording a different
program source.
1
Press <ZONE2 / REC SELECT> until “ZONE2 Source”.
“ZONE2 Source” is shown on the display.
2Turn <SOURCE SELECT> until “RECOUT Source” is
displayed.
The “ ” indicator lights.
ZONE2 Source ZONE2 TUNER ZONE2 SIRIUS····
RECOUT SIRIUS RECOUT TUNER RECOUT Source······
3Turn <SOURCE SELECT> to choose the input source
to be recorded.
4Play the program source.
For operating instructions, refer to the respective equipment’s
operating instructions.
To record FM or AM broadcasts, select the broadcast (vpage
51).
5Start recording.
For operating instructions, refer to the respective equipment’s
operating instructions.

Other Operations

Other Operations and Functions

Playing Super Audio CD
1Assign the HDMI input connector at the “HDMI”
setting (vpage 38).
2Either turn <SOURCE SELECT> or press [SOURCE
SELECT] to select the input source assigned in step 1.
The “ ” indicator lights on the display.
3Press INPUT MODE to select “AUTO” (vpage 37).
Select the input mode according to the program source to be
played.
4Select the surround mode (vpage 40 ~ 42).
We recommend playing in the DIRECT mode.
5Start playing the Super Audio CD.
The “ ” indicator lights on the display.
For operating instructions, refer to the respective equipment’s
operating instructions.
• When playing DSD signals in the DIRECT or PURE DIRECT mode,
the DSD signals are converted as such into analog signals. When
playing in other surround modes, the DSD signals are fi rst converted
into PCM format, then into analog signals.
• “DSD DIRECT” is shown on the display when playing DSD 2-channel
signals in the DIRECT mode. “DSD MULTI DIRECT” is shown on
the display when playing DSD multi-channel signals in the DIRECT
mode.
Playback
INPUT MODE
<SOURCE SELECT>
<ZONE 2 / REC SELECT>
Button located on both the main unit
and the remote control unit BUTTON
Button only on the main unit <BUTTON>
Button only on the remote control unit [BUTTON]
Symbols used to indicate buttons in this manual
Surround modeSurround mode
[SOURCE
SELECT]
[Front] [Rear]