Denon AVR-1312 manual 42

Adjusting the sound field effects

Setting items	Setting details
Center Image	0.0 – 1.0 (0.3)
Assign center channel	“Center Image” is displayed when the surround mode is set to “DTS
signal to front left and right
	NEO:6 Music”.
channels for wider sound.
Panorama	ON : Set.
Assign front L/R signal also	OFF : Do not set.
to surround channels for	“Panorama” is displayed when the surround mode is set to “PLgx
wider sound.
	Music” or “PLg Music”.
Dimension	0 – 6 (3)
Shift sound image center	“Dimension” is displayed when the surround mode is set to “PLgx
to front or rear to adjust
	Music” or “PLg Music”.
playback balance.
Center Width	0 – 7 (3)
Assign center channel	“Center Width” is displayed when the surround mode is set to “PLgx
signal to front left and right
	Music” or “PLg Music”.
channels for wider sound.
AFDM	ON : Set.
(Auto flag detect mode)	OFF : Do not set.
Detect the source’s	[Example] Playing Dolby Digital software (with EX flag)
surround back channel
	• When “AFDM” is set to “ON”, the surround mode is automatically set
signal and set the
	to the DOLBY D + PLgx C mode.
optimum surround mode
	• To play in the DOLBY DIGITAL EX mode, set “AFDM” to “OFF” and
automatically.
	“Audio Adjust” – “SB CH OUT” to “MTRX ON”.
	Some Dolby Digital EX sources do not include EX flags. If the playback
	mode does not switch automatically even when “AFDM” is set to
	“ON”, set “Audio Adjust” – “SB CH OUT” to “MTRX ON” or “PLgx
	C”.
D.Comp	Low / Mid / High : These set the compression level.
Compress dynamic range	OFF : Turn dynamic range compression off.
(difference between loud
and soft sounds).
DRC	Auto : Automatic dynamic range compression on/off control according to
Compress dynamic range	source. This can be set in the Dolby TrueHD mode.
(difference between loud	Low / Mid / High : These set the compression level.
and soft sounds).	OFF : Dynamic range compression always off.

BD 39

Setting items	Setting details
SB CH OUT	nn For 2-channel sources
Sets the method of	ON : The surround back channel is used.
generating of the surround	OFF : No signal is played from the surround back channels.
back channel.	nn For multi-channel sources
	Set the decoding method for the surround back channel.
	DSCRT ON : Play the surround back signals included in the 7.1-channel
	source.
	MTRX ON : Generate and play the surround back signals from the
	surround channel signals.
	ES MTRXz1 : Generate and play the surround back signals from the
	surround channel signals of the DTS source.
	ES DSCRTz2 : Play the surround back signals included in the
	6.1-channel DTS source.
	PLgx Cz3 : Generate and play the surround back signals by decoding
	the signals in the Dolby Pro Logic gx Cinema mode.
	PLgx M : Generate and play the surround back signals by decoding the
	signals in the Dolby Pro Logic gx Music mode.
	OFF : Do not play the surround back channel.
	z1 This can be selected when playing DTS sources.
	z2 This can be selected when playing DTS sources including a signal to
	identify discrete 6.1-channel signals.
	z3 This can be selected when “Speaker Config.” – “Surround Back”
	(C page 5 “Speaker Config.”) is set to other than “None”.
	If the source being played contains a surround back signal, the decoder
	type is automatically selected by the AFDM function. Set “AFDM” to
	“OFF” to switch to your preferred decoder.
	NOTE
	If the setting in “Speaker Config.” – “Surround Back” (C page 5
	“Speaker Config.”) is “None”, “SB CH OUT” is not displayed.
Subwoofer	ON : The subwoofer is used.
Turn subwoofer output on	OFF : The subwoofer is not used.
and off.	NOTE
	This can be set when the surround mode is “DIRECT” (vpage 23) and
	the “SW Mode” (C page 6 “Bass Setting”) is “LFE+Main”.

DefaultYes : Reset to the defaults.

The “Audio Adjust” settings No : Do not reset to the defaults. are returned to the default

settings.

version Basic

version Advanced

Information