SB CH OUT (for Multi-channel sources)

 

SB CH OUT (for 2-channel sources)

Select playback mode for surround back channels.

Determine whether to use surround back speakers.

ENGLISH

Tone Control

Adjust the tonal quality of the sound.

Getting

[Selectable items]

OFF : No signal is played from the surround back channels.

NON MTRX

:

The same signals as those of the surround

 

 

channels are output from the surround back

 

 

channels.

[Selectable items]

ON : The surround back channel signal is played.

OFF : The surround back channel signal is not played.

SUBWOOFER ATT.

Tone Defeat

Turn tone adjustments off.

[Selectable items]

ON : Playback without tone adjustment.

Connections Started

MTRX ON

PLIIx CINEMA

PLIIx MUSIC

ES MTRX

ES DSCRT

:The surround channel signals undergo digital matrix processing and are output from the surround back channels.

z1 : Decoded in Dolby Pro Logic IIx Cinema mode, surround back signal played.

z2 : Decoded in Dolby Pro Logic IIx Music mode, surround back signal played.

z3 : DTS signal played with digital matrix processing.

z4 : Signal included in DTS-ES Discrete 6.1-channel sources played.

Attenuate subwoofer level when using EXT. IN mode.

[Selectable items]

ON : The input from the subwoofer channel is attenuated.

OFF : The input from the subwoofer channel is not attenuated. Usually use in this mode.

Set this to “ON” if the subwoofer channel level seems too high when playing audio signal.

OFF : Allow tone adjustment (treble, bass).

The tone cannot be adjusted when in the DIRECT mode.

Bass

Adjust low frequency range (bass).

[Variable range] –14dB ~ 14dB

Control Remote Playback Setup

z1: This can be selected when “Surround Back Speaker” is set to “2spkrs” at the “System Setup” – “Speaker Setup” setting (vpage 23).

z2: This can be selected when “Surround Back Speaker” is set to “2spkrs” or “1spkr” at the “System Setup” – “Speaker Setup” setting.

z3: This can be selected when playing DTS sources.

z4: This can be selected when playing DTS sources including a discrete 6.1-channel signal identification signal.

Subwoofer

Turn subwoofer output on and off.

[Selectable items]

ON : The subwoofer is used.

OFF : The subwoofer is not used.

Default

Resets the settings to the default values.

Treble

Adjust high frequency range (treble).

[Variable range] –14dB ~ 14dB

“Bass” and “Treble” can be set when “Tone Defeat” is set to “OFF”.

Troubleshooting Information Zone-Multi

32