Denon AVR-1708 Turning off the Sound Temporarily, Turning the Power On and Off, Adjusting the Volume, Multi-zoneOperations, [MODE, [MODE, SOURCE, SELECT, SOURCE, SELECT, NOTE

ENGLISH
Started Getting	SOURCE SELECT	VOLUME
Connections
Setup	<ZONE2 ON/OFF>
	<ZONE2 / REC SELECT>

	Multi-zone Operations		Turning off the Sound Temporarily
		Set [MODE SELECTOR 1] to “AUDIO” and [MODE SELECTOR 2] to
	Turning the Power On and Off
		“ZONE2” (main remote control unit).
GOperation on the main unitH		Press [MUTING].
		b To cancel, either adjust the volume or press [MUTING] again.
Press <ZONE2 ON/OFF> for the zone to be operated.
			The setting is canceled when the zone’s power is turned off.
GOperation on the remote control unitH
Set [MODE SELECTOR 1] to “AUDIO” and [MODE SELECTOR 2] to
“ZONE2” (main remote control unit).		The source selected for ZONE2 is also output from the recording
Press [ZONE2 ON] or [ZONE2 OFF].
		output connectors.

Playback	[Front]	[Rear]
	SOURCE	[ZONE2 OFF]
Remote	SELECT	[ZONE2 ON]
		SOURCE
Control
		SELECT
	VOLUME
Multi
	[MUTING]

Selecting the Input Source

GOperation on the main unitH

Press <ZONE2 / REC SELECT>, then turn <SOURCE SELECT>.

GOperation on the remote control unitH

Set [MODE SELECTOR 1] to “AUDIO” and [MODE SELECTOR 2] to “ZONE2” (main remote control unit).

Press [SOURCE SELECT].

NOTE

Digital audio signals input from the COAXIAL or OPTICAL connectors cannot be played in multi-zone.

Zone-	[MODE
Information	SELECTOR 2]
	[MODE
	SELECTOR 1]
Troubleshooting	(Main remote control unit)
	[ZONE2 OFF]	[ZONE2 ON]
	SOURCE SELECT
		VOLUME
		[MUTING]
	(Sub remote control unit)

About the button names in these explanations

<> : Buttons on the main unit

[ ] : Buttons on the remote control unit

Button name only:

Buttons on the main unit and remote control unit

Adjusting the Volume

Set [MODE SELECTOR 1] to “AUDIO” and [MODE SELECTOR 2] to “ZONE2” (main remote control unit).

Press [VOLUME].

[Variable range] – – – –70dB ~ –40dB ~ +18dB

The ZONE2 volume can be adjusted only when “ZONE2” is selected at “System Setup” – “Option Setup” – “Amp Assign” (vpage 27).

49