ENGLISH

Troubleshooting Information Zone-Multi Control Remote Playback Setup Connections Started Getting

SOURCE SELECT INPUT MODE MASTER VOLUME <SOURCE> <PHONES> VIDEO SELECT

<POWER> <SPEAKER> BAND DIMMER

<ON/STANDBY><ANALOG> <EXT.IN> TUNING STATUS

[Front]

 

[OFF]

[ON/SOURCE]
SOURCE SELECT

 

 

[TUNER]

 

MASTER

 

VOLUME

VIDEO SELECT

[MUTING]

 

STATUS

[MODE

DIMMER

[MODE

SELECTOR 1]

SELECTOR 2]

 

[Rear]

[TUNER]

 

SOURCE SELECT

 

TUNING

[MODE]

BAND INPUT MODE

About the button names in these explanations

<> : Buttons on the main unit

[ ] : Buttons on the remote control unit

Button name only:

Buttons on the main unit and remote control unit

Playback

Preparations

Turning the Power On

1Press <POWER>.The power indicator lights red and the power is set to the standby mode.

2Press <ON/STANDBY> or [ON/SOURCE].

The power indicator flashes green and the power turns on.Turning the Power OffqPress <ON/STANDBY> or [OFF].The power is set to the standby mode. wPress <POWER>.The power indicator turns off, and so does the power.

NOTE

Power continues to be supplied to some of the circuitry even when the power is in the standby mode. When leaving home for long periods of time or when traveling, either press <POWER> to turn off the power, or unplug the power cord from the power outlet.

Selecting the Input Source

Operation on the main unit

Turn <SOURCE SELECT>.

If “Rec Select” is selected for the input source, press <SOURCE> before turning <SOURCE SELECT>.

Operation on the main remote control unit

Press [SOURCE SELECT].

The desired input source can be selected directly.

Setting the Input Mode

Set the input mode for this source.

Press INPUT MODE.

The INPUT mode indicator lights (AUTO, PCM, DTS mode). AUTO PCM DTSEXT. IN� ANALOG�bPress <ANALOG> to select “ANALOG”, <EXT. IN> to select “EXT. IN”.

[Selectable items]

AUTO : Detect type of digital input signal and decode and play automatically.PCM : Decode and play only PCM input signals.DTS : Decode and play only DTS input signals.ANALOG : Play only signals from analog input.EXT. IN : Play only signals from EXT. IN input.•When a digital signal is properly input, the “” indicator lights

on the display. If the “” indicator does not light, check the digital input connector assignment and the connections.

•The surround mode cannot be set if the input mode is set to “EXT. IN”.•Only set “PCM” and “DTS” when playing the respective signals.

Operations During Playback

Adjusting the Master VolumeEither turn <MASTER VOLUME> or press [MASTER VOLUME].

35