ENGLISH
9OPERATION
Before operating
1 | Refer to “CONNECTIONS” (pages 4 to 8) and | ||||
check that all connections are correct. | |||||
2 | Set the remote control unit’s slide switch to the | ||||
AUDIO position. (only when operating with the | |||||
| remote control unit) | ||||
|
| AUDIO |
| ||
|
|
|
|
| |
|
| AVR/AVC |
| VIDEO |
|
|
|
|
|
|
|
3 | Turn on the power. | ||||
Press the POWER operation switch (button). | |||||
¢ON / STANDBY
ON / SOURCE | ON/STANDBY |
Lights
£OFF
(Main unit) | (Remote control unit) |
•¢ON/STANDBY
The power turns on and “ON/STANDBY” indicator is light.
Several seconds are required from the time the power operation switch is set to the “¢ ON/STANDBY” position until sound is output. This is due to the
Set the power operation switch to this position to turn the power on and off from the included remote control unit
•£OFF
The power turns off and “ON/STANDBY” indicator is off.
In this position, the power cannot be turned on and off from the remote control unit (RC- 904).
4 | Select the front speakers. | |
Press SPEAKER A or B turn the speaker on. | ||
|
| SPEAKER |
| (Main unit) | (Remote control unit) |
B
3 4
|
| START | LEARNED/TX |
| ||
| SYSTEM CALL |
| POWER | 3 | ||
| SET | CALL | OFF | / | ||
| DVD | VDP |
| TUNER | SHIFT | |
| 1 | 2 |
| 3 |
|
|
| TV/DBS |
|
| PHONO |
|
|
| 4 | 5 |
| 6 |
|
|
| CD | CDR / TAPE | CHANNEL |
| ||
| 7 | 8 |
| 9 |
|
|
|
|
|
| TV/VCR |
| |
| +10 | 0 |
|
| A / B |
|
| VOLUME |
|
| DISC SKIP+ |
| |
4 |
| DOLBY / DTS |
|
|
| |
SPEAKER | SURROUND | DIRECT |
|
| ||
DSP SIMULATION | 5CH / 6CH STEREO STEREO |
|
| |||
|
|
|
|
| MASTER VOL. |
|
| INPUT MODE | ANALOG | EXT.IN |
|
| |
2 | AUDIO |
| TAPE | CDR/MD |
|
|
CD | MULTI | MUTING |
| |||
AVR/AVC | VIDEO DVD | TV |
|
| ||
|
|
| VDP | VCR |
|
|
|
|
| SYSTEM |
| SURROUND |
|
| TUNING | SETUP |
| PARAMETER |
| |
| BAND | RDS | TITLE |
| MENU/GUIDE |
|
|
|
|
|
| ||
|
|
|
| CH SELECT |
|
|
| MODE | PTY |
| ENTER |
|
|
|
|
|
| SELECT |
|
|
| MEMORY | RT | STATUS | ON SCREEN |
| |
|
| DISPLAY | RETURN |
| ||
| USE/LEARN | T.TONE | MULTI |
| SET UP |
|
Playing the input source
1 | 1 | 3 | 5 | ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
| B |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
23
1Select the input source to be played.
Example: CD
FUNCTION
CD
8
| (Main unit) | (Remote control unit) | |
| To select | the input source | SOURCE |
| when REC MULTI OUT or |
| |
| TUNING PRESET is selected, |
| |
| press the | SOURCE button |
|
| then operate the input function | (Main unit) | |
| selector. |
|
|
2 | Select the input mode. |
| |
• Selecting the analog mode |
| ||
| Press the ANALOG button to switch to the | ||
| analog input. |
|
|
| ANALOG | ANALOG |
|
|
|
| |
| (Main unit) | (Remote control unit) | |
•Selecting the external input (EXT. IN) mode Press the EXT. IN to switch the external input.
EXT.IN
| EXT.IN |
(Main unit) | (Remote control unit) |
•Selecting the AUTO, PCM and DTS modes The mode switches as shown below each time the INPUT MODE button is pressed.
AUTO 
PCM 
DTS
INPUT MODE
| INPUT MODE |
(Main unit) | (Remote control unit) |
|
| START | LEARNED/TX | ||
| SYSTEM CALL |
| POWER | ||
| SET | CALL | OFF | / | |
| DVD | VDP |
| TUNER | SHIFT |
| 1 | 2 |
| 3 |
|
1 | TV/DBS |
|
| PHONO |
|
4 | 5 |
| 6 |
| |
CD |
| CDR / TAPE | CHANNEL | ||
| 7 | 8 |
| 9 |
|
|
|
|
| TV/VCR | |
| +10 | 0 |
|
| A / B |
| VOLUME |
|
| DISC SKIP+ | |
|
| DOLBY / DTS |
| 5 | |
3 | SPEAKER | SURROUND | DIRECT | ||
DSP SIMULATION | 5CH / 6CH STEREO | STEREO | |||
|
|
|
|
| MASTER VOL. |
2 | INPUT MODE | ANALOG | EXT.IN |
| |
AUDIO |
| TAPE | CDR/MD |
| |
| CD | MULTI | MUTING | ||
| AVR/AVC | VIDEO DVD | TV |
| |
|
|
| VDP | VCR |
|
|
|
| SYSTEM | SURROUND | |
| TUNING | SETUP |
| PARAMETER | |
| BAND | RDS | TITLE |
| MENU/GUIDE |
|
|
|
| ||
|
|
|
| CH SELECT |
|
| MODE | PTY |
| ENTER |
|
|
|
|
| SELECT |
|
| MEMORY | RT | STATUS | ON SCREEN | |
|
| DISPLAY | RETURN | ||
Input mode selection function
Different input modes can be selected for the different input sources. The selected input modes for the separate input sources are stored in the memory.
qAUTO (auto mode)
In this mode, the types of signals being input to the digital and analog input jacks for the selected input source are detected and the program in the AVR- 2802’s surround decoder is selected automatically upon playback. This mode can be selected for all input sources other than PHONO and TUNER.
The presence or absence of digital signals is detected, the signals input to the digital input jacks are identified and decoding and playback are performed automatically in DTS, Dolby Digital or PCM (2 channel
stereo) format. If no digital signal is being input, the analog input jacks are selected.
Use this mode to play Dolby Digital signals.
wPCM (exclusive PCM signal playback mode) Decoding and playback are only performed when PCM signals are being input.
Note that noise may be generated when using this mode to play signals other than PCM signals.
eDTS (exclusive DTS signal playback mode)
Decoding and playback are only performed when DTS signals are being input.
rANALOG (exclusive analog audio signal playback mode)
The signals input to the analog input jacks are decoded
and played.
tEXT. IN (external decoder input jack selection mode) The signals being input to the external decoder input jacks are played without passing through the surround circuitry.
NOTE:
•Note that noise will be output when CDs or LDs recorded in DTS format are played in the “PCM” (exclusive PCM signal playback) or “ANALOG” (exclusive PCM signal playback) mode. Select the AUTO or DTS mode when playing signals recorded in DTS from a laser disc player or CD player.
Note on playing a source encoded with DTS
•Noise may be generated at the beginning of playback and while searching during DTS playback in the AUTO mode. If so, play in the DTS mode.
20