ENGLISH
Advanced Setup – Part 1
Setting the Input Function Level
The playback level is corrected individually for the different input sources.
1 Press D H to select “Input Function Lev.”, then press ENTER.
2 Press D H to select the input source, then press F G to set.
The volume can be adjusted within the range
3 Press ENTER.
1
2
•After completing this setting, check that the playback levels for the different sources are the same.
Setting the Function Rename
The name of the input function that is displayed can be changed.
1 Press D H to select “Function Rename”, then press ENTER.
2 Press D H to select the input function, then press F G to set.
3 Press F G to move the cursor ( 2 ) to the desired position, then press D H to select the character.
Up to 8 characters can be input.
The characters that can be input are shown below.
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z a b c d e f g h i j k l m n o p q r s t u v w x y z 0 1 2 3 4 5 6 7 8 9
! ” # % & ’ ( ) * + ,
4 Repeat step 3 to input the input source name.
To set the input function name back to how it was:
qPress F G to highlight the input function name, then press D H.
wPress D H to select “Default Yes”, then press F.
5 Once all the characters have been input, press
ENTER.
1
2
3
4
Advanced Setup – Part 1
Setting the Tuner Presets
2Auto Preset Memory
Up to 56 FM stations can be preset automatically.
1 Press D H to select “Tuner Presets”, then press
ENTER.
2 Press D H to select “Auto Preset Memory”, then press ENTER.
3 Press F to select “Yes”.
• “Search” blinks on the screen and searching begins.
• “Completed” appears once searching is completed.
1
2 
3
•If an FM station cannot be preset automatically due to poor
reception, use the “Manual tuning” operation (
page 35) to tune in the station, then preset it using the manual “Preset
memory” operation ( 
page 35).
48
ENGLISH