ENGLISH

Advanced Setup – Part 1

 

1

Option Setup

2

Setting the Power Amplifier Assignment

To suit your preference, a surround back channel’s power amplifier can be assigned to the front channel (“Front A” or “Front B”) for bi-amp playback, ZONE2.

Advanced Setup – Part 1

1

2

3

3 4

•“Base Curve Copy” is displayed after performing the Auto Setup.

2Manually adjusting the room equalizer’s “Flat” correction curve set with the auto setup procedure

1 Press D H to select “Base Curve Copy”, then press F.

2 Press F to select “Yes”, then press ENTER.

• The type of the copied correction curve is displayed in the upper right of this screen.

1

2

1 Press D H to select “Option Setup”, then press

ENTER.

2 Press D H to select “Power Amp Assign”, then press ENTER.

3 Press F G to set.

S. Back:

The surround back speakers are used in MAIN ZONE.

Front A, Front B:

This provides a bi-amp mode for the 2 main front speakers, replicating the front A or front B amplifier channel’s outputs.

ZONE2:

This mode assigns the surround back amplifier channels to provide ZONE2 speaker-level outputs from the surround back speaker terminals.

4 Press ENTER.

54

Front Bi-Amp connections

Dynamic sound with a range wider than that of full range systems can be played by connecting bi-amp compatible speakers to the AVR-2807. Be sure to consult the owner’s manual of your bi-amp-capable speakers for further information before proceeding.

AVR-2807

SPEAKER

[L]

NOTE:

•When making bi-amp connections, be sure to remove the short-circuiting bar included with the speaker.

ENGLISH