ENGLISH
Advanced Setup – Part 2
Others Setup
Setting the Room Equalizer Setup
Set the Room Equalizer setting with “All” or “Assign” for each surround mode.
1 Press D H to select “Room EQ Setup”, then press
ENTER.
2 Press F G to set, then press ENTER.
All:
Sets the equalizer for all surround modes.
Assign:
Sets the equalizer individually for each surround mode ( 
page 24).
3 When “All” is selected: Press F G to set.
OFF:
The equalizer is not used.
Audyssey:
Adjusts the frequency response of all speakers to correct the effects of room acoustics.
Front:
Adjusts the frequency response of the surround speakers to match the characteristics of the front channel speakers.
Flat:
Adjusts the frequency response of all speakers to the flattest response. This mode is suitable for
Manual:
Selects the setting value that was set in the “Setting the
Manual Equalizer Setup” ( 
page 53, 54).
4 Press ENTER.
1
2
3
•The equalizer setting of “Audyssey”, “Front” and “Flat” can be selected after performing the Auto Setup.
•When the speaker set as “None” with the Auto Setup is changed to on manually, the equalizer of “Audyssey”, “Front” and “Flat” cannot be used.
•When headphones are connected, the Room Equalizer cannot be used.
60
Advanced Setup – Part 2
Setting the Direct Mode Setup
Set the ON/OFF setting of Room Equalizer, in the case of the surround mode is in “Direct” or “Pure Direct”.
1 Press D H to select “Direct Mode Setup”, then press ENTER.
2 Press F G to set.
ON, OFF:
Select “ON” to use the room equalizer, “OFF” if you do not want to use it.
3 Press ENTER.
1
2
ENGLISH