ENGLISH

Advanced Setup – Part 2

3 Pressto set.D H to select the speaker, then press F G

4 Press ENTER.

1

2

Setting the Channel Level

Set the volume of the various speakers so that the sound output from the speakers and the subwoofer seems to have the same volume level.

1 Press D H to select “Channel Level”, then press

ENTER.

1 2

Advanced Setup – Part 2

3

3

..... L1

..... L2

..... L3

..... L4

..... L5

..... L6

..... L7

..... L8

•Press D to select “Step”, then press F G to change the amount of variation if so desired.

•The distance changes in units of 0.1 meters (1 foot) or 0.01 meters (0.1 foot) each time the button is pressed. Select the value closest to the measured distance.

•Please note that the difference of distance for every speaker should be 6.0 m (20 ft) or less. If you set an invalid distance, a CAUTION notice, such as screen right will appear. In such cases, move the appropriate speaker to the position of the displayed value.

2 Press F G to set.

Auto:

Adjust the level while listening to the test tones produced automatically from each speaker.

Test tones are automatically emitted from each speaker.

Manual:

Adjust with the speaker from which the test tone is output switched manually.

3 Press D H to select “Test Tone Start”, then press F to select “Yes”.

4 When “Auto” mode is selected: Press F G to adjust the volume.

-1• Test tones are output automatically, in the order shown below.

FL C FR SR

(2 speakers)

SW SL SBLSBR

 

(1 speaker)

SB

 

The volume can be adjusted within the range –12 dB to +12 dB.

4 When “Manual” mode is selected:

Press D H to select the speaker, then press F G

-2to adjust the volume.

5 Press ENTER.

58

4

-1

4

-2

•To cancel the setting, press H and select “Level Clear”, then press F and select “Yes”.

•To adjust the channel level separately for the different play modes after setting the channel level, perform the operation on page 34.

ENGLISH