Advanced Setup – Part 2
Setting the MIC Input Select
Sets whether the setup microphone is connected to the pin jack (V. AUX L channel) or mini jack (SETUP MIC).
1 Press D H to select “Mic Input Select”, then press
ENTER.
2 Press F G to set.
Mic:
Select this to use the included microphone.
Normally set to this setting.
V.Aux L:
Select this when using a microphone other than the one included.
3 Press ENTER.
1
2
Check the parameter
1 Press D H to select “Parameter Check”, then press ENTER.
2 Press D H to select the item, then press ENTER.
For instructions on checking the results of each item (
page 12).
3 Press D H to select “EQ Parameter Check”, then press ENTER.
4 Press D H to select the type of equalizer, then press ENTER.
5 Press F G to select the speaker.
The display is only an approximate picture of the response and that correction is happening at all frequencies.
1
2
3
4 
5 
61
ENGLISH
Advanced Setup – Part 2
•To reset:
Press D H to select “Restore” at the “Parameter Check” screen, then press F.
ENGLISH