Advanced Setup – Part 2
1 |
2 |
ENGLISH
Advanced Setup – Part 2
Setting the Subwoofer Setup |
| Setting the Distance |
3
h
Center Speaker
Front Speaker
Subwoofer 
Surround Speaker 
Select the method of playback of the subwoofer for playing the low bass signals.
1 Press D H to select “Subwoofer Setup”, then press ENTER.
2 Press F G to set.
LFE:
For any channel(s) that are set to “Large”, low frequencies in that channel’s corresponding source are directed to that loudspeaker only. The low frequencies played from the subwoofer are only the LFE signals and the low frequencies of channels set to “Small”.
This parameter is for optimizing the timing with which the audio signals are produced from the speakers and subwoofer according to the listening position.
Preparations:
Measure the distances between the listening position and the speakers (L1 to L8 on the diagram at the below).
FL |
| C |
| FR |
SW
L3
L1 L2
Surround back Speaker 
LFE+Main:
L4
Listening position
•Select “Large” or “Small” not according to the actual size of the speaker but according to the speaker’s capacity for playing low frequency (bass sound below the frequency set for the Crossover Frequency) signals. If you do not know, try comparing the sound at both settings (setting the volume to a level low enough so as not to damage the speakers) to determine the proper setting.
Low frequencies from speaker channels that have been set to “Large” are reproduced from those speakers as well as from the subwoofer(s).
3 Press ENTER.
1
2
| L5 |
| L6 |
SL | L7 | L8 | SR |
SBLSBR
1 Press D H to select “Distance”, then press
ENTER.
2 Press F G to select “Meters” or “Feet”.
•The subwoofer mode setting is only valid when and “Yes” is set for the subwoofer in the “Setting the Speaker Configuration”.
•Select the “LFE+Main” mode if you want low frequency signals to always be played from the subwoofer channel.
•Select the mode achieving a voluminous bass sound when playing music or movie sources.
57
ENGLISH