Advanced Setup – Part 1

Setting the Volume Control

This sets the volume level of output.

1 Press D H to select “Volume Control”, then press

ENTER.

2 Pressset. D H to select the item, then press F G to

Vol. Limit:

Set the volume’s upper limit.

•OFF:

If you do not want to set a volume limit, select “OFF”.

In this case, the volume can be set to the AVR-2807’s maximum volume (output) level of +18 dB, which is extremely loud.

•–20 dB, –10 dB, 0 dB:

The volume cannot be increased above the selected levels.

P. On Lev.:

Set the volume level when the power is turned on.

You can adjust the MAIN ZONE volume level within the range of –80 to +18 dB (and ZONE2 volume level within the range of –70 to +18 dB).

1

2

•When the power amplifier is assigned to either of the ZONE2 channels at “Power Amp Assign”, “–VAR–” (only variable) is displayed and the fixed level cannot be set.

ENGLISH

Advanced Setup – Part 1

4 Press D H to select the input source, then press F G to set.

ON, OFF:

When that input source is selected, the power supplied from the trigger out jack turns on (or off).

5 When “MAIN” was selected at step 3:

Press D H to select the surround mode, then press F G to set.

ON:

If “ON” is selected when an input source set to “ON” is selected, the power supplied from the trigger out jack turns on.

OFF:

If “OFF” is selected when an input source set to “ON” is selected, the power supplied from the trigger out jack turns off.

6 Press ENTER.

•LAST

The volume set when the AVR-2807 was last used is stored in the memory and set when the power is turned on.

•– – – (Mute)

The volume is always muted when the power is turned on.

Mute Lev.:

Set the level of volume attenuation in the mute mode.

• FULL

The volume is fully muted.

• –20 dB, –40 dB

Setting the Trigger Out

Use the DC12V output of the AVR-2807’s 2 trigger out jacks in association with the various input sources and surround modes. If “ZONE = MAIN” is selected, settings can be made for the individual surround modes.

1 Press D H to select “Trigger Out”, then press

ENTER.

D H

1

2

4

3

The volume is lowered 20 dB (or 40 dB) from the current level.

3 Press ENTER.

2 Press to select the trigger out jacks, then press ENTER.

3 Press F G to select “MAIN” or “ZONE2”.

The power supplied from the trigger out jack turns on and off when the power for the set zone is turned on and off.

55

5

ENGLISH