ENGLISH
Advanced Setup – Part 1
Setting the On Screen Display (OSD)
Set whether or not to display the on screen display for indications other than the menu screens.
1 Press D H to select “On Screen Display”, then press ENTER.
2 Pressset. D H to select the item, then press F G to
Function/Mode Status:
•ON, OFF:
Select “ON” to display the on screen display when the input source is selected, “OFF” if you do not want to display it.
Master Volume Status:
•ON, OFF:
Select “ON” to display the on screen display when the main volume is adjusted, “OFF” if you do not want to display it.
Display Mode:
•Mode 1:
Flickering is not prevented.
•Mode 2:
Prevents flickering of the on screen display when there is no video signal.
Use this mode if the on screen display is not displayed in “Mode1”.
3 Press ENTER.
1
2
Advanced Playback
Setting the 2ch Direct/Stereo
Make the
1 Press D H to select “Advanced Playback”, then press ENTER.
2 Press D H to select “2ch Direct / Stereo”, then press ENTER.
• The current settings are displayed.
3 Press F G to select “Custom”.
4 Pressset. D H to select the item, then press F G to
Large:
Select this when using large speakers with ample low frequency reproduction capabilities.
Small:
Select this when using small speakers without ample low frequency reproduction capabilities.
Yes, No:
Select “Yes” when a subwoofer is connected, “No” when no subwoofer is connected.
LFE:
For any channel(s) that are set to “Large”, low frequencies in that channel’s corresponding source are directed to that loudspeaker only. The low frequencies played from the subwoofer are only the LFE signals and the low frequencies of channels set to “Small”.
LFE+Main:
Low frequencies from speaker channels that have been set to “Large” are reproduced from those speakers as well as from the subwoofer(s).
5 Press ENTER.
52
Advanced Setup – Part 1
1
2
3
4
ENGLISH