Advanced Setup – Part 1
2Preset Skip
Preset channels that are not used often can be skipped.
1 Press D H to select “Preset Skip”, then press
ENTER.
2 Press D H to select the preset channel, then press F G to set.
ON, OFF:
Select “OFF” to skip the preset channel, “ON” if you do not want to skip.
When H is pressed at the very bottom of the screen, then the next preset memory block appears.
3 Press F G to select the preset memory block.
4 Repeat steps 2 and 3.
5 Press ENTER.
1 
2
3 
2Preset Name
The preset channels can be given the names you want.
1 Press D H to select “Preset Name”, then press
ENTER.
2 Press D H to select the preset channel, then press F G to set.
3 Press F G to move the cursor ( 2 ) to the desired position, then press D H to select the character.
Up to 8 characters can be input.
The characters that can be input are shown below.
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z a b c d e f g h i j k l m n o p q r s t u v w x y z 0 1 2 3 4 5 6 7 8 9
! ” # % & ’ ( ) * + ,
4 Repeat step 3 to input the preset channel name.
To set the preset channel name back to how it was:
qPress F G to highlight the preset channel, then press D H.
wPress D H to select “Default Yes”, then press F.
5 Once all the characters have been input, press
ENTER.
6 Press ENTER.
1
2
3
4
49
ENGLISH
Advanced Setup – Part 1
Video Setup
Setting the HDMI In Assignment
The HDMI input terminals are assigned for the different input sources.
Select the HDMI audio signal playback method.
1 Press D H to select “Video Setup”, then press
ENTER.
2 Press D H to select “HDMI In Assign”, then press
ENTER.
3 Press D H to select the input source, then press F G to set.
HDMI1, HDMI2:
Assign the HDMI input signal to “HDMI1” (or “HDMI2”).
4 Press D H to select “Audio”, then press F G to select where to output the audio signals.
AMP:
Output the speakers connected to the
TV:
Output the TV connected to the
5 If no audio signal is included in the input signal: Press D H to select the input source, then press F
Gto set.
EXT. IN, ANALOG:
Output the selected audio input signal to the set terminal.
6 Press ENTER.
ENGLISH