Denon AVR-688 Surround Modes, A2Auto Surround Mode, A3Room EQ Setup, A4Direct Mode Setup, A5Remote ID Setup, Surround Playback of 2-channelSources, .Op, 12AutoSurr. ON, 2.In

ENGLISH

Getting	A2Auto Surround Mode
	Make setting for memorizing surround mode setting for each input
Started	signal type.
	[Display]
Connections
			1.Sp 2.In			3	.Op
								E
				Option Setup
									E
Setup					12AutoSurr. ON
	[Selectable items]
Playback
	ON	: Memorize settings. Most recently stored surround mode is
		automatically selected.
Control Remote
	OFF	: Do not memorize settings. Surround mode does not change
		according to input signal.
	The auto surround mode function lets you store in the memory the
-Multi	surround mode last used for playing the three types of input signals
	listed below.
	q Analog and PCM 2-channel signals (STEREO)
Zone
	w 2-channel signals of Dolby Digital, DTS or other multi-channel
Information	format (DOLBY PLgx Cinema)
	e Multi-channel signals of Dolby Digital, DTS or other multichannel
	format (DOLBY/DTS SURROUND)
	b Default settings are indicated in ( ).
Troubleshooting
	A3Room EQ Setup
	Select room EQ setting method.
	[Display]
			1.Sp 2.In			3	.Op

A4Direct Mode Setup

Select room EQ use for DIRECT mode.

[Display]

1.Sp 2.In 3.Op

E

Option Setup

E

14 Direct OFF

[Selectable items] ON : Use room EQ.

OFF : Do not use room EQ.

A5Remote ID Setup

Set remote control ID.

[Display]

	1.Sp		2.In			3		.Op
											E
		Option					Setup
												E
					15		Remote		ID	1
[Selectable items]				1				2	3		4

NOTE

When using the AVR-688 with only the included remote control unit (RC-1075), there is no need to make settings.

When using a separately sold remote control unit (RC-7000CI, etc.), this function can be used. Match the ID setting of the remote control unit and the receiver.

Surround Modes

Standard Playback

This is the standard mode for enjoying surround sound according to the program source.

Surround Playback of 2-channel Sources

To select these surround modes using the SELECT/ENTER knob on the main unit or press the STD button on the remote control unit. The mode switches each time the button is pressed.

n When using a surround back speaker
[Selectable items]	DOLBY PLgx	DTS NEO:6	neural
n When not using a surround back speaker
[Selectable items]	DOLBY PLg	DTS NEO:6	neural
DOLBY PLgx :The	signals are decoded in DOLBY PLgx or

or DOLBY PLg DOLBY PLg for playback.

Cinema : This mode is suited for movie sources.

Music : This mode is suited for music sources.

Game : This mode is suited for games.

Pro Logic : This is the Pro Logic playback mode. This can be selected when playing with a DOLBY PLg decoder. When this mode is selected, “DOLBY PL” is displayed.

DTS NEO:6 : The signals are decoded in DTS NEO:6 for playback.

E

Option Setup

E

13 EQ All

[Selectable items]

All : Apply settings to all surround modes.

Assign : Make settings for each surround mode separately.

Operations (vpage 22)

Cinema

Music

neural

:This mode is suited for movie sources.

:This mode is suited for music sources.

:It is possible to play analog input signals and PCM (2-channel, 48 kHz or less) in the surround mode.

This is the optimum mode for playing sources recorded in XM HD Surround (vpage 38).

29