Denon AVR-688 g ~ A12ch Direct/Stereo Custom, 1.Sp 2.In, Option, 2ch, Cstm, OFF, Yes, LFE, Freq

Power On Level

This sets the volume set when the main zone’s power is turned on.

[Selectable items]

Last : Use the memorized setting from the last session.

–– – : Always use the muting on condition when power is turned on.

–80dB ~ +18dB : Set the volume level when the power is turned on in units of 1 dB.

Mute Level

This sets the amount of attenuation of the volume when the mute mode is set in the main zone.

[Selectable items]

Full : The sound is cut off entirely.

–40dB : The sound is attenuated by 40 dB.

–20dB : The sound is attenuated by 20 dB.

g ~ A12ch Direct/Stereo Custom

Make speaker settings for 2-channel mode playback.

[Display]

1.Sp 2.In			3.Op
								E
	Option			Setup
									E
		5	2ch		Cstm		OFF
									E
		5	2ch		Cstm		ON
										E
				6	2ch	F		Large
										E
				7	2ch	SW			Yes
										E
				8	2ch	LFE			Norm
										E
				9	2ch	FL		12ft
										E
				10	2ch		FR		12ft
										E
				11	2ch		Freq 80

Setting

To change the settings, select “ON”.

[Selectable items]

OFF : Use the same settings as in “Speaker Setup”.

ON : Make separate settings for 2-channel mode.

									ENGLISH
Front										Getting
Select front speaker size.
										Started
Large	Small		: Select front speaker size.
[Selectable items]
										Connections
Subwoofer
Select subwoofer use.
[Selectable items]
										Setup
Yes	No		: Select subwoofer use.
Subwoofer Mode										Playback
Select low range signal to be reproduced by subwoofer.										Remote
[Selectable items]
LFE (Normal)		LFE+Main			: Select subwoofer signal.					Control
Distance FL
Set distance from listening position to front left speaker.										-Multi
										Zone
[Variable range]				0ft ~ 60ft
Distance FR
										Information
Set distance from listening position to front right speaker.
[Variable range]				0ft ~ 60ft
Crossover										Troubleshooting
Select crossover frequency from which subwoofer handles low range
signal.
[Selectable items]
40Hz	60Hz		80Hz		90Hz	100Hz	110Hz	120Hz	150Hz
200Hz	250Hz		: Select crossover frequency.

Operations (vpage 22)

28