Select the “Cinema”, “Music”, “Game” and “Pro Logic” modes at “Surround Parameter” – “MODE” (vpage 31).

Playing Multi-channel Sources (Dolby Digital, DTS, etc.)

[Selectable items]

STANDARD :This mode is for decoding the input signals according to their format
DSP Simulation Playback

The desired mode according to the program source and viewing situation can be selected from among 7 DENON original surround modes.

The surround parameters can be adjusted (vpage 53, 54) to achieve an even more realistic, powerful sound field.

[Selectable items]

5CH / 7CH STEREO z1: This mode is for enjoying stereo sound from all speakers.

ROCK ARENA : This mode is for enjoying the atmosphere of a live concert in an arena.

ENGLISH

Stereo Playback

[Selectable items]

STEREO :

This is the mode for playing in stereo. The tone can be adjusted. Sound is output from the front left and right speakers and subwoofer.

Direct Playback

[Selectable items]

DIRECT :

Setup Connections Started Getting

and playing surround sound.

The display when the STANDARD mode is selected depends on the input signal and surround back output playback mode.

 

Input signal

Display

Dolby

DOLBY DIGITAL

DOLBY DIGITAL

(other than 2ch) /DOLBY DIGITAL EX
Digital
JAZZ CLUBMONO MOVIEVIDEO GAME
:This mode is for enjoying the atmosphere of a live concert in a jazz club.z2 :This mode is for playing monaural movie sources with surround sound.:This mode is suited for achieving surround sound with video games.

In this mode the signals bypass the tone adjustment circuitry for high quality sound.

The sound is output to the same channels as the input signal.The display when the DIRECT mode is selected depends on the input signal.

Input signal

Display

Remote Playback

Source

DOLBY DIGITAL

DOLBY DIGITAL+PLgx CINEMA

EX

DOLBY DIGITAL+PLgx MUSIC

 

 

DTS (5.1ch) /

DTS SURROUND

 

DTS+PLgx CINEMA

 

DTS-ES Discrete

DTSDTS+PLgx MUSIC
6.1 /

Surround

DTS+NEO:6
DTS-ES Matrix
SourceDTS ES MTRX6.1 (z1)

6.1 /

 

DTS ES DSCRT6.1 (z2)

 

DTS 96/24

 

DTS 96/24 (z3)

 

 

z1 : This is displayed when the input signal is “DTS-ES Matrix 6.1”.z2 : This is displayed when the input signal is “DTS-ES Discrete 6.1”.z3 : This is displayed when the input signal is “DTS 96/24”.For details, see page 55.

To select these surround modes using the SELECT/ENTER knob on the main unit or press the STD button on the remote control unit.

MATRIX

: This mode lets you add a sense of expansion

 

to stereo music sources.
VIRTUAL: This mode is for enjoying surround

 

effects using only the front speakers or

 

headphones.

z1: “5CH STEREO” is displayed when “Surround Parameter” – “SB CH OUT” is set to “OFF” (vpage 32).

z2: When playing sources recorded in monaural in the MONO MOVIE mode, the sound will be off balance with a single channel (left or right), so input to both channels.

To select these surround modes using the SELECT/ENTER knob on the main unit, press the SIMU button on the remote control unit. The mode switches each time the button is pressed.

Depending on the program source being played, it may not be possible to achieve a satisfactory surround effect. In this case, try other modes to achieve a sound field suited to your tastes.

Analog signal /PCM (2ch) /Dolby Digital source / DIRECTDTS source /Other 2-channel digital signals

For details, see page 56.

To select these surround modes using the SELECT/ENTER knob on the main unit, press the D/ST button on the remote control unit. The mode switches each time the button is pressed.

Troubleshooting Information Zone-Multi Control

30