Denon AVR-688 a ~ h Speaker Configuration, jSubwoofer Mode Setup, .Sp 2.In, 3.Op, Speaker Setup, Front Large, Subwoofer Yes, 1.Sp 2.In 3.Op, 7 SW Mode Norm

ENGLISH

Getting	Example of Display of Default
	Values
Started
	In lists of selectable items or adjustable ranges, the item
Connections	surrounded by a border is the default value.
	[Selectable items]					Large			Small
Setup
Playback	Speaker Setup
	change the settings made with the auto setup procedure.
	Use this procedure to set the speakers manually or if you wish to
Remote
		a ~ h	Speaker Configuration
		j	Subwoofer Mode Setup
Control		k ~ A5Distance
		A6	Crossover Frequency
		A7	Test Tone
-Multi
Zone	a ~ h Speaker Configuration
	Select speaker configuration and size.
Information
	(bass reproduction capability)
	[Display]
Troubleshooting			1	.Sp 2.In				3.Op
										Q
					Speaker Setup
											Q
							1	Front Large
											Q
							6	Subwoofer Yes

Front Speaker

Select front speaker size.

[Selectable items] Large Small

Center Speaker

Select center speaker use and size.

[Selectable items] Large Small None

Surround Speaker

Select surround speakers use and size.

[Selectable items] Large Small None

Surround Back Speaker

Select surround back speaker use and size.

[Selectable items] (				)
	Large	Small	None
(			)
	2spkrs	1spkr

NOTE

By default, the AVR-688’s “Amp Assign” setting is set to “ZONE2”.To use as the surround back speaker for the main zone, change the “Amp Assign” setting (vpage 27).

Subwoofer

Select subwoofer use.

[Selectable items] Yes No

Large :Select this when using large speakers with ample low frequency reproduction capabilities.

Small :Select this when using small speakers without ample low frequency reproduction capabilities.

None :Select this when no speaker is connected.

Yes :Select this when a subwoofer is connected.

No :Select this when no subwoofer is connected.

2spkrs 1spkr :

Select the number of surround back speakers.

•Select “Large” or “Small” not according to the physical size of the speaker but according to the low frequency reproduction capabilities based on the frequency set at “Crossover Frequency” (vpage 24).

•When “Front Speaker” is set to “Small”, “Subwoofer” is automatically set to “Yes”.

•If “Subwoofer” is set to “No”, “Front Speaker” is automatically set to “Large”.

•If “Surround Speaker” is set to “None”, “Surround Back Speaker” are automatically set to “None”.

•When using just one surround back speaker, connect it to the left channel (SBL).

jSubwoofer Mode Setup

Select low range signal to be reproduced by subwoofer.

[Display]

1.Sp 2.In 3.Op

Q

Speaker Setup

Q

7 SW Mode Norm

[Selectable items]

LFE (Normal) : Play low range and LFE signal of channels set to “Small”.

LFE+Main : Play low range and LFE signal of all channels.

•This can be set when “System Setup” – “Speaker Setup” – “Subwoofer” is set to “Yes”.

•Play music or a movie source and select the mode offering the strongest bass.

•Select “LFE+Main” if you want the bass signals to always be produced from the subwoofer.

Operations (vpage 22)