Denon AVR-785 8SETTING UP THE SYSTEM, Use the following buttons to set up the system

ENGLISH

8SETTING UP THE SYSTEM

•Once all connections with other AV components have been completed as described in “CONNECTIONS” (see pages 7 to 15), make the various settings described below on the monitor screen using the AVR-1905/785’s on-screen display function.

These settings are required to set up the listening room’s AV system centered around the AVR-1905/785.

Use the following buttons to set up the system

1	Set the slide switch to “AUDIO”.
	Set the slide switch to “AUDIO”.
2	Use the following buttons to set up the system:

SYSTEM SETUP button

Press this to display the system setup on the display.

CURSOR buttons (•, ª, 0, 1)

Press this change what appears on the display.

ENTER button

Press this to switch the display.

Also use this button to complete the setting.

• System setup items and default values (set upon shipment from the factory)

System setup

Default settings

Speaker

Input the combination of speakers in your system and their

Front Sp.

Center Sp.

Surround Sp.

Surround Back Sp.

Subwoofer

corresponding sizes (SMALL for regular speakers, LARGE for full-

Configuration

size, full-range) to automatically set the composition of the signals

Large

Small

Small / 2 spkrs

Yes

output from the speakers and the frequency response.

This parameter is for optimizing the timing with which the audio

Front L

Front R

Center

Surround

Subwoofer

Back L

Back R

Delay Time

signals are produced from the speakers and subwoofer according

to the listening position.

12 ft

10 ft

12 ft

Subwoofer Mode

This selects the subwoofer speaker for playing deep bass signals.

Subwoofer mode = LFE (Normal)

Crossover

Set the frequency (Hz) below which the bass sound of the various

80 Hz

Frequency

speakers is to be output from the subwoofer.

This adjusts the volume of the signals output from the speakers

Front L

Front R

Center

Surround

Subwoofer

Back L

Back R

Test Tone

and subwoofer for the different channels in order to obtain

optimum effects.

0 dB

Digital In

This assigns the digital input jacks for the different

Input source

DVD/VDP

TV/DBS

Assignment

input sources.

Digital

COAXIAL

OPTICAL 1

OPTICAL 2

Inputs

Video Input Mode

Set the input signal to be output from the monitor output terminal.

AUTO

Auto Surround

Auto surround mode function setting.

Auto Surround Mode = ON

Mode

Ext. In SW Level

Set the Ext. In Subwoofer channel playback level.

Ext. In SW Level = +15 dB

Power AMP

Set this to switch the surround back channel’s power amplifier for

Surround Back

Assignment

use for Zone 2.

On Screen

This sets whether or not to display the on-screen display that

appears on the monitor screen when the controls on the remote

On Screen Display = ON /Mode 1

Display

control unit or main unit are operated.

A setting to prevent flickering.