ENGLISH

Playback using the external input (EXT. IN) jacks

1

Set the external input (EXT.

EXT. IN

 

 

 

 

IN) mode.

 

 

 

Press the EXT. IN button to

 

 

 

switch the external input.

 

 

 

 

(Main unit)

(Remote control unit)

Once this is selected, the input signals connected to the FL (front left), FR (front right), C (center), SL (surround left) and SR (surround right) channels of the EXT. IN jacks are output directly to the front (left and right), center and surround (left and right) speaker systems as well as the pre-out jacks without passing through the surround circuitry.

In addition, the signal input to the SW (subwoofer) jack is output to the PRE OUT SUBWOOFER jack.

2

Cancelling the external input mode

 

 

 

 

To cancel the external input (EXT. IN) setting, press the INPUT

 

MODE (AUTO, PCM, DTS) or ANALOG button to switch to

 

the desired input mode. (See page 37.)

 

INPUT MODE

ANALOG

 

 

 

(Main unit)

(Remote control unit)

•When the input mode is set to the external input (EXT. IN), the play mode (DIRECT, STEREO, STANDARD (DOLBY/DTS SURROUND), 5CH/7CH STEREO or DSP SIMULATION) cannot be selected.

2 1

2 1

NOTES:

•In play modes other than the external input mode, the signals connected to EXT. IN jacks cannot be played. In addition, signals cannot be output from channels not connected to the input jacks.

•The external input mode can be set for any input source. To watch video while listening to sound, select the input source to which the video signal is connected, then set this mode.

•If the subwoofer output level seems to high, set the “SW ATT.” surround parameter to “ON”.

Playing audio sources (CDs and DVDs)

The AVR-1905/785 is equipped with two 2-channel playback modes exclusively for music. Select the mode to suit your tastes.

1

DIRECT mode

Use this mode to achieve good quality 2-

 

 

channel sound while watching images. In

 

this mode, the audio signals bypass such

 

circuits as the tone circuit and are

 

transmitted directly, resulting in good

 

quality sound.

DIRECT /￿

STEREO

(Main unit)

1, 2

(Remote control unit)

2

STEREO mode

Use this mode to adjust the tone and

 

 

achieve the desired sound while watching

 

images.

DIRECT /￿

STEREO

(Main unit)

(Remote control unit)

1 2

39