ENGLISH

Power Amp Assignment

Setting the power amplifier assignment

•Make this setting to switch the power amplifier for the surround back channel to ZONE2.

•If ZONE2 is selected, the signal that selected at ZONE2 is output at “SURR. BACK/ZONE2” PREOUT terminals.

1

Select “Surround Back” to use as the surround back channel,

“Zone2” to use as Zone 2 out.

26 AMP S.BACK

2

Press the ENTER or

(down) button to switch the On Screen Display setting.

 

Setting the On Screen Display (OSD)

•Use this to turn the on-screen display (messages other than the menu screens) on or off.

•Sets the on-screen display’s display mode.

Mode 1: Prevents flickering of the on-screen display when there is no video signal.

Mode 2: Flickering is not prevented.

Use this mode if the on-screen display does not appear in the mode 1, as may happen according to the TV being used.

1

Select “ON” or “OFF”.

 

 

 

 

27 OSD

ON

2

Select the On Screen Display Mode.

 

28 OSD

MODE1

Select the “MODE1” or “MODE2”.

3

Press the ENTER or

(down) button to switch the Auto Preset Memory setting.

 

29