ENGLISH

•After adjusting using the test tones, adjust the channel levels either according to the playback sources or to suit your tastes, as (described) below.

1

Select the speaker whose level you want

 

 

to adjust.

The channel switches as shown below each time the button is pressed.

FL C FR SR SBR SBL

 

 

 

SW

 

 

SL

 

 

 

 

 

 

 

 

 

 

 

 

 

When the surround back speaker setting is set to

 

 

“1sp” for “Speaker Configuration”, this is set to “SB”.

 

 

“SB” appears only when “POWER AMP ASSIGN” setting

 

 

is SURR. BACK mode.

 

 

 

 

 

NOTE: Please make sure the “AUDIO” position of the slide

 

 

switch on the remote control unit.

 

 

 

 

 

 

 

 

 

 

2

Adjust the level of the selected

 

 

 

 

speaker.

 

 

 

 

Default setting of channel level is 0 dB.

The level of the selected speaker can be adjusted within the range of +12 to –12 dB using the cursor buttons.

SW channel level can be turned off by decreasing one step from –12 dB.

OFF ´ –12 dB ´ +12 dB

2 2 1

46