9 OPERATION

Before operating

1

Refer to “CONNECTIONS” (pages 6 to 13) and check that all

 

 

 

 

connections are correct.

 

 

 

2

Select “AMP mode” using the TAPE, CDR/MR or CD

 

 

 

 

button. (only when operating with the remote control unit)

3 4

(Remote control unit)

3

Turn on the power.

 

 

Press the POWER switch (button).

ON/STANDBY

Light

(Main unit)

(Remote control unit)

When pressed, the power turns on and the display lights. The sound is muted for several seconds, after which the unit operates normally. When pressed again, the power turns off, the standby mode is set and the display turns off.

Whenever the ON/STANDBY button is in the STANDBY state, the apparatus is still connected on AC line voltage. Please be sure to unplug the cord when you leave home for, say, a vacation.

4

The front speakers switch as shown below each time the

 

 

FRONT SPEAKER button is pressed.

(Main unit)

(Remote control unit)

FRONT A FRONT B

FRONT A+B

3

2

4

41