Manuals / Brands / Home Audio / Stereo System / Denon / Home Audio / Stereo System

Denon AVR-983 2MULTI ZONE MUSIC ENTERTAINMENT SYSTEM (When using PREOUT), 2MULTI ZONE MUSIC ENTERTAINMENT SYSTEM (When using SPEAKER OUT), NOTES:

1 76

Download 76 pages, 4.36 Mb

Multi-zone playback with multi-source

MULTI ZONE MUSIC ENTERTAINMENT SYSTEM

•When the outputs of the “ZONE 2” OUT terminals are wired and connected to integrated amplifiers installed in other rooms, different sources can be played in rooms other than the main zone in which this unit and the playback devices are installed. (Refer to ZONE 2 on the diagram below.)

•ZONE 2 SPEAKER OUT can be used when “ZONE2” is selected at System Setup Menu “Power Amp Assignment”. In this case, Surround Back Speaker Out cannot be used for MAIN ZONE. (See page 25.)

•When a sold separately room-to-room remote control unit (DENON RC-616, 617 or 618) is wired and connected between the MAIN ZONE and ZONE 2, the remote-controllable devices in the main zone can be controlled from ZONE 2 using the remote control unit.

To control playback devices other than the ones above, either use that device’s remote control unit or preset a separately sold programmable remote control unit.

NOTES:

•For the AUDIO output, use high quality pin-plug cords and wire in such a way that there is no humming or noise.

•For instructions on installation and operation of separately sold devices, refer to the devices’ operating instructions.

2MULTI ZONE MUSIC ENTERTAINMENT SYSTEM (When using PREOUT)

ZONE 2	MAIN ZONE
RC-617		ROOM-TO-ROOM REMOTE CONTROL SYSTEM
		ROOM-TO-ROOM REMOTE CONTROL SYSTEM
INTEGRATED		(separately sold) control line
INTEGRATED	AVR-2803
AMPLIFIER	AVR-2803	ZONE2 AUDIO signal cable
		ZONE2 AUDIO signal cable
PROGRAMMABLE		SPEAKER cable
REMOTE		SPEAKER cable
REMOTE
CONTROL UNIT		* Refer to CONNECTIONS on pages 6 to 13.
	SYSTEM REMOTE	* Refer to CONNECTIONS on pages 6 to 13.
RC-616	CONTROL UNIT RC-924

2MULTI ZONE MUSIC ENTERTAINMENT SYSTEM (When using SPEAKER OUT)

ZONE 2

MAIN ZONE

PROGRAMMABLE REMOTE CONTROL UNIT

RC-617

	ROOM-TO-ROOM REMOTE CONTROL SYSTEM
	(separately sold) control line
AVR-2803	ZONE2 SPEAKER cable
	ZONE2 SPEAKER cable
	SPEAKER cable

* Refer to CONNECTIONS on pages 6 to 13.

SYSTEM REMOTE

RC-616	CONTROL UNIT RC-924

48

Contents

“SERIAL NO 2SAFETY PRECAUTIONS 2NOTE ON USE / OBSERVATIONS RELATIVES A L’UTILISATION Page 2INTRODUCTION TABLE OF CONTENTS 2ACCESSORIES 1 BEFORE USING 2 CAUTIONS ON INSTALLATION 3CAUTIONS ON HANDLING 4FEATURES 5 CONNECTIONS Connecting the video components Connecting the video components equipped with S-Videojacks •A note on the S input jacks •Precaution when using S-jacks Page Connecting the antenna terminals Connecting the external input (EXT. IN) jacks Connecting the ZONE 2 jacks Speaker system connections Connections Protector circuit Note on speaker impedance 6 PART NAMES AND FUNCTIONS Remote control unit 7SETTING UP THE SYSTEM NOTES: •Speaker system layout Basic system layout Before setting up the system Setting the type of speakers •Parameters — Assignment of low frequency signal range — — Crossover Frequency — NOTE — Subwoofer mode — Setting the Delay Time Preparations: Setting the Channel Level Page Setting the Digital In Assignment Setting the Video In Assignment Setting the Dolby Digital Setup [1]Setting the power amplifier assignment [2]Setting the Zone2 vol. level Variable: 0 dB, -40dB: Setting the Ext. In Subwoofer Level Setting the Auto Surround Mode Setting the On Screen Display (OSD) Setting the Trigger Out Setup Auto Tuner Presets Protecting the setting After completing system setup •On-screendisplay signals 8REMOTE CONTROL UNIT Using the remote control unit Operating DENON audio components Preset memory Operating a component stored in the preset memory Page Learning function 1, 3 System call (1) System call buttons (2) Storing system call signals 2, 6 (3) Using the system call function Punch Through (1)Punch through button (2)Making the punch through setting (1) Resetting (1) Resetting “learned” buttons (2) Resetting the punch through setting 9 OPERATION Playing the input source Example: CD AUTO PCM DTS Input mode selection function Note on playing a source encoded with DTS Input mode display Input signal display Example: Stereo Playback using the external input (EXT. IN) jacks Playing audio sources (CDs and DVDs) DIRECT mode STEREO mode After starting playback [1] Adjusting the sound quality (TONE) BASS TREBLE [2]Listening over headphones Multi-sourcerecording/playback [1] Playing one source while recording another (REC OUT mode) 2,42 3,53 2MULTI ZONE MUSIC ENTERTAINMENT SYSTEM (When using PREOUT) 2MULTI ZONE MUSIC ENTERTAINMENT SYSTEM (When using SPEAKER OUT) 10 SURROUND Fader function Surround parameters q Pro Logic II Mode: Panorama Control: Dimension Control: Center Width Control: DTS NEO:6 mode 1, 4 1 3 2 4,5 2,6 4 5 2Dialogue Normalization Surround parameters w CINEMA EQ. (Cinema Equalizer): D.COMP. (Dynamic Range Compression): LFE (Low Frequency Effect): 11DSP SURROUND SIMULATION DSP surround simulation 1 2 1,3 Tone control setting 2, 3 Surround parameters e 2Surround modes and parameters 12LISTENING TO THE RADIO Checking the preset stations 13LAST FUNCTION MEMORY 14INITIALIZATION OF THE MICROPROCESSOR 15 TROUBLESHOOTING 16 ADDITIONAL INFORMATION Surround back speakers 2Number of surround back speakers Speaker setting examples 1.DTS-EScompatible system (using surround back speakers) (1)Basic setting for primarily watching movies 2. When not using surround back speakers Surround Dolby Surround (1)Dolby Digital 2 Dolby Digital and Dolby Pro Logic 2Dolby Digital compatible media and playback methods DTS Digital Surround 2DTS compatible media and playback methods DTS-ESExtended Surround TM 2DTS-ESTM Discrete 2DTS-ESTM Matrix 2DTS Neo:6TM surround •DTS Neo:6 Cinema DTS 96/24 System setup items and default values (set upon shipment from the factory) Surround modes and parameters 2Differences in surround mode names depending on the input signals SPECIFICATIONS