
1 | Set the external input (EXT. |
| |
| IN) mode. |
| Press the EXT. IN to switch |
| the external input. |
(Main unit) | (Remote control unit) |
Once this is selected, the input signals connected to the FL (front left), FR (front right), C (center), SL (surround left), SR (surround right), SBL (surround back left) and SBR (surround back right) channels of the EXT. IN jacks are output directly to the front (left and right), center, surround (left and right) and surround back (left and right) speaker systems as well as the
2 | Cancelling the external input mode |
| |
| To cancel the external input (EXT. IN) setting, press the input |
| mode (AUTO, PCM, DTS) or ANALOG button to switch to the |
| desired input mode. (See page 42.) |
(Main unit) | (Remote control unit) |
•When the input mode is set to the external input (EXT. IN), the surround mode (DIRECT, STEREO, DOLBY/DTS SURROUND, 5/7CH STEREO or DSP SIMULATION) cannot be set.
2 1
2 1
NOTES:
•In play modes other than the external input mode, the signals connected to these jacks cannot be played. In addition, signals cannot be output from channels not connected to the input jacks.
•The external input mode can be set for any input source. To watch video while listening to sound, select the input source to which the video signal is connected, then set this mode.
The
Select the mode to suit your tastes.
1 | DIRECT mode |
|
Use this mode to achieve good quality 2- | 1 | |
| channel sound while watching images. In | 2 |
| this mode, the audio signals bypass such | |
| circuits as the tone circuit and are | (Remote control unit) |
| transmitted directly, resulting in good |
quality sound.
STEREO mode2 Use this mode to adjust the tone and achieve the desired sound while watching images.
(Remote control unit)
44