61
Advanced Setup – Part 2 Advanced Setup – Part 2
Check the parameter
1Press DDHHto select “ParameterCheck”, then
press ENTER.
Press DDHHto select the type of equalizer, then
press ENTER.
Press DDHHto select the item, then press ENTER.
For instructions on checking the results of each item (
page 12).
Press DDHHto select “EQ Parameter Check”, then
press ENTER.
Press FFGGto select the speaker.
The display is only an approximate picture of the response
and that correction is happening at all frequencies.
2
3
4
5
1
•To reset:
Press DDHHto select “Restore” at the “Parameter Check”
screen, then press FF.
23
45
Setting the MIC Input Select
Sets whether the setup microphone is connected to the pin jack
(V. AUX L channel) or mini jack (SETUP MIC).
Press DDHHto select “Mic Input Select”, then press
ENTER.
Press FFGGto set.
1
2
Press ENTER.
3
12
Mic:
Select this to use the included microphone.
Normally set to this setting.
V.Aux L:
Select this when using a microphone other than the one
included.