Operation

Listening to tracks repeatedly (Repeat play)Listening to all the tracks repeatedly (All-track repeat play)1 Press [REPEAT] once.

• The “RPT” indicator lights.

2 Press <1/3> or [1].

• During normal playback:

All the tracks are played repeatedly.

• During programmed playback:

The tracks are played repeatedly in the programmed order.

• In the random play mode:

The tracks are played once each in random order, then played again in a different order.

Listening to a specific section between two points repeatedly (A-B repeat play)

1 During playback, press [A-B]at the point at which you want to start repeating (point A).

• The “A-” indicator lights.

2 During playback, press [A-B]at the point at which you want to stop repeating (point B).

•The “A-B” indicator lights and the A-B section is played repeatedly.

¢Stopping A-B repeat playback:

Press [A-B]again.

ENGLISH

Operation

Cuing with programmed searching

1 Press [PROGRAM].

2 Use [NUMBER] (0 ~ 9, +10) to select the track.

3 Either press <1/3> twice or press [3] once.¢To start playback:

Press <1/3> or [1].

Using the timer play function

Also refer to the operating instructions of the timer device.

DCD-500AE (This unit)

¢Stopping all-track repeat playback:

Press [REPEAT] twice in a row, or press 5 to open the disc tray.

•In the programmed play or random play mode during all-track repeat playback, normal playback resumes when [REPEAT] is pressed once.

Listening to a specific track repeatedly (1-track repeat play)During playback, press [REPEAT] twice in a row.

• The “RPT1” indicator lights and that track is played repeatedly.

¢Stopping 1-track repeat playback:

Press [REPEAT] again, or press 5 to open the disc tray.

•1-track repeat playback is not possible during programmed or random playback.

•A-B repeat playback is not possible during programmed playback or random playback.

Cuing and stopping playback (Pause)Cuing with direct searching1 Either press <1/3> twice or press [3] once.

2 Use [NUMBER] (0 ~ 9, +10) to select the track.

¢To start playback:

Press <1/3> or [1].

Amplifier

Timer device

AC outlet

 

(Wall)

1 Turn on the power of the connected components.

2 Switch the amplifier’s input function to the function to which the player is connected.

3 Load a disc in the player.4 Set the audio timer for the desired times.5 Turn the timer “ON”.

• The power of the components connected to the timer turns off.

When the set time is reached, the power of the different components automatically turns on and playback starts from the first track.

9

ENGLISH