![ENGLISH](/images/new-backgrounds/8845/88459x1.webp)
ENGLISH
Thank you for purchasing the DENON compact disc player. Read the Operating Instructions thoroughly, and operate this player properly.
TABLE OF CONTENTS
z MAIN FEATURES ……………………………………………………5 | n |
x BEFORE USING ………………………………………………………5 | m DAISY CHAIN PLAYBACK………………………………………11~14 |
c CAUTIONS ON INSTALLATION ……………………………………6 | , COMPACT DISCS …………………………………………………14 |
v CAUTIONS DURING USE ……………………………………………6 | . TROUBLESHOOTING ………………………………………………15 |
b INSTALLATION ……………………………………………………7, 8 | ⁄0SPECIFICATIONS ……………………………………………………15 |
•ACCESSORIES
Check that the following parts are included in addition to the main unit.
Q Operating instructions .………1 | W Warranty.………………………1 | E Service station list ……………1 | R Connection cord |
T Connection cords | Y Connection cords | U CD booklet file | (5P |
(audio) .…………………………2 | (COAX for daisy chain).....……2 | and label.....……………………1 | for daisy chain connection ..…1 |
4 | 5 | 6 | 7 |
1MAIN FEATURES
(1)
The CDs are stored in a rack so they can be loaded and replaced easily.
(2)Daisy chain connection
The
In addition, the features described below can be used when connected in daisy chain to the
•
The
•Disc file function
The disc file input operations (disc titles, track titles, artists’ names and group registration) can be performed from the main unit. This information can be viewed on the main unit’s display or on the
•AL24 Processing and HDCD® (High Definition Compatible Digital®)
When connected in a daisy chain, the audio signals are
transferred digitally, providing high quality sound. In addition, sound can be played through the AL24 Processing and HDCD®
decoder built into the
instructions.
(3)
In addition to connecting
(4)
The
(5)Quick access (in the single zone mode)
The two CD drive mechanisms can be used alternately so that CDs can be played consecutively with no waiting time when switching to the next CD.
2 BEFORE USING
Pay attention to the following before using this unit:
•Moving the set.
To prevent short circuits or damaged wires in the connection cords, always unplug the power cord and disconnect the connection cords between all other audio components when moving the set.
•Before turning the power operation switch on.
Check once again that all connections are proper and that there are not problems with the connection cords. Always set the power operation switch to the standby position before connecting and disconnecting connection cords.
•Store this instructions in a safe place.
After reading, store this instructions along with the warranty in a safe place.
Also fill in the items on the back page for your convenience.
•Note that the illustrations in this instructions may differ from the actual set for explanation purpose.
5