Getting Started
Inserting the batteries
Remove the remote control unit’s rear cover.
Set two R03/AAA batteries in the battery compartment in the indicated direction.
Put the rear cover back on.
Operating range of the remote control unit
•Point the remote control unit at the remote sensor when operating it.
•The remote control unit can be used from a distance of up to about 23 feet / 7 meters, at a horizontal angle of up to 30° with respect to the sensor.
30° 30° 
Approx. 23 feet / 7 meters
ENGLISH
Getting Started
Part names and functions
Front panel
Notes on batteries:
•Replace the batteries with new ones if the set does not operate even when the remote control unit is operated nearby the unit. (The attached batteries are only for verifying operation.)
•When inserting the batteries, be sure to do so in the proper direction, following the “ ” and “ ” marks in the battery compartment.
•To prevent damage or leakage of battery fluid:
•Do not use a new battery together with an old one.
•Do not use two different types of batteries.
•Do not
•If the battery fluid should leak, carefully wipe the fluid off the inside of the battery compartment and insert new batteries.
•Remove the batteries from the remote if it will not be in use for long periods.
NOTE:
•It may be difficult to operate the remote control unit if the remote sensor is exposed to direct sunlight or strong artificial light.
2
POWER indicator
POWER switch ( 
ON/STANDBY 
OFF ) Remote control sensor
BASS control knob
TREBLE control knob
BALANCE control knob
VOLUME control knob
MIC LEVEL control knob
MIC INPUT jack
INPUT SELECTOR knob
Use this to select the source that you wish to listen to.
Input indicator
The selected input is shown with an orange indicator.
MIC AGC(Auto Gain Control) button/ indicator
Adjusts the level to prevent clipping the sound when mic input level is extremely high.
NOTE:
•This function works when the MIC MIX indicator lights up.
MIC MIX button/indicator
Mixes mic input with source input and outputs them.
AUTO MUSIC MUTE button/indicator
Use this to output source input as its level is attenuated with the MUSIC MUTE LEVEL knob on the rear panel when mixing mic input with source input.
NOTE:
•This function works when the MIC MIX indicator lights up.
LOUDNESS button/indicator
Amplifies the bass and treble sound that is hard to hear at low volume level and achieves a more natural sound.
SPEAKERS A/B buttons/indicators
Switches the speakers connected to speaker output terminals.
ENGLISH
