Denon DN-A300M Getting StartedGetting Started, Speakers A/B button, Tuner block, Power button

ENGLISH

Getting StartedGetting Started

	NOTE:			Remote control unit
• When the VOLUME control knob is set just	• Functions , ,	and	are only	Amplifier operating		DENON
	available when the MIC MIX		function is
beyond the “12 o’clock” position (over				buttons	PROFESSIONAL
	turned on.
halfway), the adjustments that can be made					product operating
				SPEAKERS A/B button
with the BASS and TREBLE controls is						buttons
decreased.				This switches the speakers
				connected to speaker terminals.
• When the VOLUME control knob is set to					TUNER block
maximum or turned fully clockwise, the bass				POWER button	TUNER PRESET +, -
and treble can no longer be adjusted.				This operates the main unit’s
Rear panel				power.	These	switch	the	preset
				Input selector buttons	channel.
				These switch the input source.	CD player block
				MUTE button	0~9, +10 : Number buttons
				Press this to mute the sound.
				The power indicator on the main	DISC SKIP :
				unit blinks red.	This button selects the disc,
				Press again to produce sound.	when	using	a	DENON
					PROFESSIONAL multi-disc CD
				LOUDNESS button	player.	: Play
				This amplifier the bass and treble
				sound that is hard to hear at low		: Pause
				volume level and achieves a		: Stop
				more natural sound.	,	: Search
				Volume +, - buttons	RANDOM : Random
						playback
				These adjust the volume.	REPEAT : Repeat playback
				MIC MIX button	Tape deck block
SIGNAL GND (ground) terminal	SPEAKER SYSTEMS terminals			This mixes mic input with source		: Rewind
				input and outputs them.
Connect the ground wire from your turntable
	Connect your speakers here.					: Fast-forward
here.
	AC OUTLETS			MIC AGC button		: Reverse play
				This adjusts the level to prevent		: Forward play
NOTE:	Use these as the power outlets for other audio
				clipping the sound.	A/B	: Switch	between
• This terminal is not a safety ground.	devices. Check equipment power requirement
						decks A and B for
	ratings before use(see the ratings as marked			AUTO MUSIC MUTE
INPUTS terminals	on the rear panel). If in doubt consult with your			button		double decks
Connect your source equipment here.	dealer or DENON PROFESSIONAL distributor.			This outputs source input as its	REC : Record
						: Pause
Recording input/output terminals				level is attenuated with the
				MUSIC MUTE LEVEL knob on		: Stop
(TAPE-1 and TAPE-2)				the rear panel.
Connect your recording equipment here.	• Short-circuiting plugs are inserted into the
PRE OUT terminals	PHONO input terminals. Remove these when
	connecting a turntable. Be sure to keep it for
Use this to add such equipment as a power
	future use.
amplifier or subwoofer.
				• The included remote control unit can be used to operate DENON PROFESSIONAL CD players, tape
MIC SENSE LEVEL knob
	NOTE:			decks and tuners.
The mic input sensitivity can be adjusted.
	• NEVER insert the short-circuiting pin plug			• When using it, also refer to the operating instructions of the other devices.
Left turn is low sensitivity.
	into the recording output or PRE OUT			• Some products may not be operable.
Right turn is high sensitivity.
	terminals. Doing so could result in damage.
MUSIC MUTE LEVEL knob
The source input attenuation level can be				3
adjusted(-20dB ~ 0dB) when mixing mic input
with source input.			ENGLISH