A 1
Stutter
• A1 and A2 points can be also used for Stutter playback.
Exit/Reloop
RELOOP
EXIT/

ENGLISH

7SEAMLESS LOOP/HOT START AND STUTTER

(1)Seamless Loop/Hot Start/Stutter (A1, A2 buttons)Setting the A point (loading the Hot Start
data)

During Seamless Loop playback,

 

Push the A1 or A2 button @0to

you can exit or return to your loop.

(2)B Trim

•The Seamless Loop B points can be fine-adjusted in real-time using the Jog wheel.

•Trim the points live during loop playback for rehearsal monitoring.

qWhen the FLIP/B TRIM button !9is pushed during seamless loop playback, the “Trim Mode”

set the A point and Hot Start data.

A 1

EXIT:

 

 

 

1 • A1 and A2 buttons can be used

 

While the Seamless Loop playback, push

separately for each Hot Start.

 

the EXIT/RELOOP button @2to exit from

• When an A point is set, the corresponding

5 looping. DN-D4500 continues playback after

A button light and that button is set to the

the B point.

Hot Start mode.

 

RELOOP:

1

function is turned on. → 3

When the FLIP/B TRIM button !9is pushed 1 or 2 times during playback or pause, the B TRIM mode is selected.

 

When the EXIT/RELOOP button @2is pushed

Starts Hot Start

after exiting the loop, Seamless Loop playback

resumes from the A point instantly.

 

When A1 or A2 button @0is

A 1

2 pushed, Hot Start playback starts from the corresponding A point.

Setting the B point for Seamless Loop

When the B button @1is pushed

 

To enable stutter playback, push

 

6 FLIP/B TRIM button !9for A1/A2

after setting the A point or after

B

starting Hot start playback, the B

 

buttons. The display will indicate

 

STR. Push the FLIP/B TRIM button

point is set and Seamless Loop

 

 

!9to switch between the Hot

playback starts from the A point.

 

 

Start/Seamless Loop and Stutter

3 • The B button works with respect to the A

modes.

point operated before the B button @1was

 

pushed.

 

Clear the A1/A2 point

• If the B button @1is pushed during

 

 

While pressing the FLIP/B TRIM button !9, push

seamless loop playback or after EXIT

the A1 or A2 button to clear the corresponding A

playback, the B point (or Loop)moves to the

and B points.

point at which the button was pushed.

 

 

Management of 2 seamless loops

 

Or push the FLIP/B TRIM button !9for more

 

 

than 1 sec to clear both A1 and A2 points at

 

• When the B point for A1 is detected after

7

once.

 

playback started from A1 point, playback

Quickly pressing the FLIP/B TRIM button !9

 

 

4

returns to A1 point seamlessly. While A1 to

 

first and then A1, A2 or B buttons will clear

B looping, B point for A2 ignored.

 

these points individually.

 

• When the B point for A2 is detected after

 

 

 

playback started from A2 point, playback

 

 

 

returns to A2 point seamlessly. While A2 to

 

 

 

B looping, B point for A1 ignored.

 

 

Select B point

w

If more than 2 loops are set,

A 1

 

the corresponding A1/A2

2button @0to your B point loop needs to be selected, otherwise B trim defaults to the last loop that was made.

Trim B point

e Turn the Jog wheel y (inner SEARCH

SCAN

side) slowly to move the B

I II

§6 7

 

 

point 1 frame at a time.

3• Range for trimming B point is limited as follows. Between 5 frames after A point and disc end.

*MP3

Between 5 frames after A point and file end.

Save the B point

r Push the flashing A1/A2

A 1

4button @0again to save new B point, and the unit will

automatically exit from the B Trim mode.

12