![](/images/new-backgrounds/1031487/3148753x1.webp)
ENGLISH
10 INITIALIZATION OF THE MICROPROCESSOR
When the indication of the display is not normal or when the operation of the unit does not shows the reasonable result, the initialization of the microprocessor is required by the following procedure.
2 | 1 | Switch off the unit and remove the AC cord from the wall |
| outlet. | |
B |
|
|
| 2 | Hold the following TUNING UP button and TUNING DOWN |
| button, and plug the AC cord into the outlet. | |
| 3 | Check that the entire display is flashing with an interval of |
| about 1 second, and release your fingers from the 2 buttons |
and the microprocessor will be initialized.
11LAST FUNCTION MEMORY
•This unit is equipped with a last function memory which stores the input and output setting conditionsas they were immediately before the power is switched off.
•The unit also equipped with a
27