[2] Setting the loudness mode
Press the TONE or MODE button to display “LOUDNESS”.
TONEMODE
1 |
|
(Main unit) | (Remote control unit) |
•The mode switches as shown at the left each time the button is pressed.
✽“LOUDNESS” cannot be selected when the source direct mode is on.
Either turn the FUNCTION dial on the main unit or use the remote control unit’s SELECT buttons.
VOLUME
/SELECT
(ON)
FUNCTION
(OFF)(ON)
2
(OFF)
(Main unit) | (Remote control unit) |
[3] Adjusting the balance
Press the TONE or MODE button to display “BALANCE” (Refer to page 12.)
TONEMODE
1 |
|
(Main unit) | (Remote control unit) |
✽“BALANCE” cannot be selected when the source direct mode is on.
Either turn the FUNCTION dial on the main unit or use the remote control unit’s SELECT buttons.
|
| (right | VOLUME | (left channel |
|
| /SELECT | volume | |
(left channel |
| channel |
| adjustment) |
volume | FUNCTION | volume |
|
|
adjustment) | adjustment) |
| ||
|
|
|
| (right |
|
|
|
| channel |
(Main unit) |
| (Remote | volume | |
| adjustment) | |||
2 |
|
| control unit) | |
|
|
|
| |
8LISTENING TO RADIO
(1) Tuning
|
|
|
|
| 3 |
| 2 | |
|
|
|
|
|
|
|
| VOLUME |
FUNCTION |
|
|
| MEMORY | TUNING |
|
| SOURCE |
TONE | TIMER | DISPLAY | / SET | DOWN | UP | BAND | DIRECT | |
SYSTEM
ON / STANDBY
PHONES
1
OFF |
| ON |
| SYSTEM | 1 |
| POWER |
|
PROG /
DIRECT
1 2 3
CALL
4 5 6
CLEAR
7 8 9
RANDOM REPEAT
10 +10
CD SRS
TAPE MD TIME EDIT
TIME/
DIMMER PANEL
RDS BAND 
TUNING
ENGLISH
Auto Tuning•When a program being broadcast in stereo is received, the “STEREO” indicator lights and the program is received in stereo.
•If reception is poor and there is much noise in the stereo signals, press the BAND button to set the FM MONO mode.
•When one of the TUNING UP/DOWN button is pressed, the frequency changes in steps of 100 kHz in the FM band, 10 kHz in the AM band.
•If one of the TUNING UP/DOWN button is held for over 1 second, the frequency continues to change when the button is released (auto tuning) and stops when a station is tuned in. Tuning will not stop at stations whose reception is poor.
•To stop the auto tuning function, press the TUNING UP/DOWN button once.
NOTE:
A humming sound may be heard when using a TV
•To set to “ON”:
•If the volume of the right speaker is low:
2
3
nearby while receiving AM programs. If this happens, move the system as far from the TV as possible.
Turn the dial clockwise (,) or press the D button.
To set to “OFF”:
Turn the dial counterclockwise (.) or press the H button.
Turn the dial clockwise (,) or press the D button.
If the volume of the left speaker is low:
Turn the dial counterclockwise (.) or press the H button.
•The balance can be set to “CENTER” or adjusted within the range of +1 to +10 in steps of 1. When set “CENTER”, the difference between the volume of the left and right speakers is 0.
STOP PLAY VOLUME /SELECT
Example: Tuning in FM 92.50 MHz(AM stations are tuned in using the same procedure.)Press the power operation switch to turn on the power.
SYSTEM |
|
ON / STANDBY | ON |
1 | SYSTEM |
POWER | |
| |
(Main unit) | (Remote control unit) |
Press the BAND button on the tuner to select the FM AUTO.
| BAND | BAND |
2 | (Main unit) | (Remote control unit) |
Use the TUNING UP/DOWN button to tune the frequency to 92.50.
TUNING |
|
|
DOWN | UP | TUNING |
3 | (Main unit) | (Remote control unit) |
This lights when a station is tuned in.
13