Denon DRA-F101 (2) Presetting AM and FM stations, (3) Tuning in Preset Stations, Procedure, Examples:, Examples:, Presetting, Procedure:

ENGLISH

(2) Presetting AM and FM stations

Example: To preset the currently tuned in FM station at preset number “3”

(3) Tuning in Preset Stations

Example: To tune in the station stored at preset number “3”

			1, 3		2
								VOLUME
FUNCTION				MEMORY	TUNING			SOURCE
	TONE	TIMER	DISPLAY	/ SET	DOWN	UP	BAND	DIRECT

SYSTEM

ON / STANDBY

PHONES

AM-FM STEREO RECEIVER DRA-F101

MEMORY

Press the MEMORY/SET button.	/ SET
• The “P.SET”, “MEMO”
indicator flashes.

•Depending on what preset number is displayed before the button is pressed, the preset number section flashes as shown

1below and the setting standby mode is set. When “01” to “10” or “0-” is displayed,

“0-” flashes.

When “11” to “20” or “1-” is displayed, “1-” flashes.

When “21” to “30” or “2-” is displayed, “2-” flashes.

When “31” to “40” or “3-” is displayed, “3-” flashes.

While the “MEMO” indicator	TUNING
	DOWN	UP
is flashing, press the TUNING
UP button three times to
display “P.SET”, “03”.

2

✽To store the station at a different preset number, use the tuning buttons (TUNING UP or DOWN) to set the desired preset number.

Press the MEMORY/SET button	MEMORY
	/ SET
again while the “MEMO”
3 indicator is flashing.

•The “MEMO” indicator turns off and the station is preset.

✽A total of 40 AM and FM stations can be preset using this procedure.

✽ When operating with the		TUNER	CD
system remote control unit,			MD
first set the remote control		TAPE
unit’s function selector switch
to “TUNER”.
			(RC-927)
Procedure
MEMORY			MEMORY
/ SET	3		/ SET
	/	/
DRA-F101	(RC-927)		DRA-F101
(this unit)			(this unit)

•This setting can also be made by pressing the

TUNING

button instead of pressing “e”.

•To store the station at a different preset number,

use the number buttons and the +10 button on the system remote control unit (RC-927) to set the desired preset number.

Examples:

To store the station at preset number 12:

Press +10 , 2

To store the station at preset number 29:

Press +10 , +10 , 9

Presetting

•When a station is preset, both the reception frequency and reception mode are stored in the memory.

•If a station is preset at a number where another station is already preset, the previous station is erased and the new station is set.

•The preset memory is not erased immediately if the power supply is cut off momentarily.

✽ When operating with the	TUNER	CD
system remote control unit,		MD
first set the remote control	TAPE
unit’s function selector switch
to “TUNER”.
		(RC-927)
Procedure:
• Instead of pressing e, the	preset
		3

channel can also be called out by

pressing the < or > button to display

“P.SET 03”.

•To call the station at a different preset number, use the number buttons and the +10 button on the

system remote control unit (RC-927) to set the

desired preset number.

Examples:

To call the station at preset number 12:

Press +10 , 2

To call the station at preset number 29:

Press +10 , +10 , 9

14