Denon DVD-3800BDCI Virtual Surround, Setting the BD Audio Mode, Pure Direct Mode, BD-V, DivX®, “Normal”, “All Off”, “Video Off”, [U/ V/ Y/ Z], [PURE DIRECT], “Display Off”

ENGLISH

AdvancedAL24
ON / STANDBY
ON OFF	HDMI	VIDEO NOISE
SD CARD	RESOLUTION	REDUCTION
VIDEO NR

Virtual Surround

BD-V DVD-VDVD-VR

You can enjoy stereo phonic virtual space through your existing 2-channel stereo system.

Playback

Setting the BD Audio Mode

BD-V

BD audio mode is to choose between two ways; you could output the secondary and interactive audio accompanied by the primary audio or you could output the primary audio only. Depending on

[U/ V/ Y/ Z]

BLU-RAY DISC PLAYER DVD-3800BDCI

[ENTER] [RETURN]

1)In stop mode, press [MODE] repeatedly until the virtual surround setting appears.

Off

2)Use [U/ V] to select “1” (Natural effect), “2” (Emphasized effect) or “Off”.

3)Press [RETURN] to exit.

Note

•Select virtual surround “Off” or lower the volume if the sound is distorted.

•This function cannot be used during dialog speed (refer to page 17).

•For the virtual surround, audio signal will always be 2-channel LPCM.

Pure Direct Mode

BD-V DVD-VDVD-VR CD MP3 WMA

DivX®

the setting of the mode, Dolby Digital, DTS, Dolby Digital Plus, Dolby TrueHD, or DTS-HD output changes between Multi LPCM and bitstream.

1)In stop mode with BD inserted, press [MODE].

2)Use [U / V] to select desired setting.

“Mix Audio Output”

If it is available, BD video's secondary and interactive audio will be output with the primary audio.

•The secondary audio is the audio for the sub picture (Director's comment etc.) and the interactive audio is the audio for the interactive application (Button click sounds etc.).

“HD Audio Output”

Only the primary audio will be output. Set this mode in order to output Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS or DTS-HD sound of BD through HDMI connection.

3) Press [RETURN] to exit.

• You can also set “BD Audio Mode” from the setup menu.

[PURE DIRECT] [MODE]

About the button names in this explanation

< >: Buttons on the main unit

[] : Buttons on the remote control

Button name only:

Buttons on the main unit and remote control

Use this function to shut down unused circuitry to achieve high quality analog sound.

1)Press [PURE DIRECT] repeatedly to select your desired pure direct mode.

•Each time you press [PURE DIRECT], the pure direct mode changes as “Normal” A“Video Off” A“Display Off” A “All Off” A“Normal”. The modes will be displayed on the front panel display.

Video / audio outputs for each mode

“Normal” : Normal playback mode (pure direct mode is off).

“Video Off” : Video signal will not be output.

“Display Off” : Circuitry for front panel display and indicators will be shut down.

“All Off” : Video signal will not be output and circuitry for front panel display and indicators will be shut down.

Note

•If you turn off the unit or put this unit to standby mode, the pure direct mode will go back to “Normal”.

Refer to page 32.

Note

•In “Mix Audio Output” mode, even you set “HDMI Multi(Normal)” in “HDMI Audio Out” setting, multi LPCM will be output from HDMI OUT for BD audio. Refer to page 11.

•In “Mix Audio Output” mode with HDMI audio being output, 2-channel downmix LPCM will be output from DIGITAL OUT for BD audio.

•In “Mix Audio Output” mode with “HDMI Audio Out” set to “Audio Mute” and “Digital Out” set to “Bitstream”, DTS, DTS-HD and LPCM will be output as Dolby Digital for BD audio. Refer to page 12.

•In “Mix Audio Output” mode, from 7.1ch AUDIO OUT, Dolby Digital Plus, Dolby TrueHD and DTS-HD will be output as multi LPCM decoded from its corresponding core stream.

ENGLISH