Function Setup

Speaker Setting

This unit allows you to enjoy multi-channel surround sound such as 7.1-channel / 5.1-channel surround.

<Example of basic layout with 7.1ch surround system>

Front speaker (left)

Front speaker (right)

Center speaker

Subwoofer

Surround speaker (left)

Surround speaker (right)

Surround back speaker (left)

 

 

 

Surround back speaker (right)

 

 

To make the most of its feature, set up your speakers appropriately by referring to the table below. Speaker setting options are available at the following locations;

<Speaker setting for the audio signal output from the HDMI OUT jack > (Available when you have HDMI cable connected to the HDMI OUT jack) Setup AQuick AHDMI Audio Out AHDMI Multi(LPCM)

Setup ACustom AAudio AHDMI Audio Out AHDMI Multi(LPCM)

<Speaker setting for the audio signal output from the 7.1ch AUDIO OUT jacks > Setup AQuick A7.1ch Audio Out AMulti Channel

Setup ACustom AAudio A7.1ch Audio Out AMulti Channel

ENGLISH

Function Setup

How to navigate through the “HDMI Multi(LPCM)” and “Multi Channel” setting

1)Use [U/ V] to select the menu item.2)Use [U/ V] to select setting items.

•Use [RETURN] to go back to the previous screen.

3)Use [Y/ Z] to select desired options.(Except for “Test Tone” and “Default”.)For “Test Tone”:Use [Y/ Z] to select “Manual” or “Auto”, then press [ENTER].

•The test tone will be output. If you select “Manual”, use [U/ V] to select desired speaker, then use [Y/ Z] to adjust the volume. If you select “Auto”, use [Y/ Z] to adjust the volume of the speaker that output the test tone.

•If you want to stop the test tone, press [RETURN].

For “Default”:Press [ENTER] to reset the “Delay Time” setting to the default.4)Press [SETUP] to exit.
Menu

Setting items

Options

Descriptions
Speaker Configuration

Front

Large*

Large:

Select the desired

 

 

For the large speakers

 

Small

speaker to set. Then

 

with strong low frequency

 

 

Center

Large*

change the setting

reproduction capabilities.

appropriately by

 

Small/None

Small:

referring to the

 

 

For the small speakers

Subwoofer

On*

descriptions.

which do not provide

 

 

 

Off

 

 

strong bass sound.

 

Surround

Large*

None:

 

 

 

No speakers.

 

 

Small/None

 

 

For “Subwoofer” there is

 

 

 

 

Surround Back

Large*

 

only “On” or “Off”.

 

 

Small/None

 

 

 

 

 

 

Crossover Freq:

40/60/80*/

Select according to the

 

For speakers set to

100/120Hz

low frequency

 

“Small”, the sound

 

reproduction capabilities

 

with frequencies

 

of the connected speaker.

 

below that of this

 

 

 

frequency are cut.

 

 

 

This bass sound that

 

 

 

has been cut is

 

 

 

output from the

 

 

 

subwoofer or a

 

 

 

speaker for which

 

 

 

“Large” is set.

 

 

 

 

 

 

•For “Speaker Configuration”, the settings of each speaker sizes may be adjusted automatically corresponding to each setting. (e.g. If the “Front” is set to “Small”, the “Subwoofer” will automatically set to “On” and also you cannot set “Center”, “Surround”, and “Surround Back”, to “Large”.)

•If you connect to 5.1-channel surround system, set “Surround Back” in “Speaker Configuration” to “None”.

34

ENGLISH