Denso CLASSIC PLUS 14, CLASSIC PLUS 26 operation manual Daily Inspection & Maintenance, Filter

Models: CLASSIC PLUS 26 CLASSIC PLUS 14

1 26
Download 26 pages 19.22 Kb
Page 21
Image 21
DAILY INSPECTION & MAINTENANCE

DAILY INSPECTION & MAINTENANCE

Emptying the Drain Tank

To empty the drain tank, refer to instructions on page 12.

Cleaning the Air Filters

Clean the air filters once a week. If the unit is used in a dusty environ- ment, more frequent cleaning may be required.

A dirty air filter reduces air output resulting in a decrease in cooling capacity.

Filter Removal Method (both models)

Turn the unit off, by pressing the COOL ON/OFF button.

Remove the 3 air filters.

NOTE: To remove the side air filters, lift upward, then pull outward from the bottom. To remove the front panel air filter, pull out top corners, then lift upward.

FILTER

Remove the element from each filter.

Filter Element Cleaning Method (both models)

Remove dust from the element with a vacuum cleaner, or rinse in cold or luke- warm water. If the element is extremely dirty, wash with a neutral detergent.

After the element has been cleaned, rinse with clean running water, allow to dry, then reinstall.

FILTER

15

Page 21
Image 21
Denso CLASSIC PLUS 14, CLASSIC PLUS 26 operation manual Daily Inspection & Maintenance, Filter