Maintenance
Light Bulb Replacement
Allow at least five (5) minutes for light bulbs to cool before touching bulbs to avoid accidental burning of skin.
Light bulbs need to be replaced when you notice a dark section of the flame. There are three (3) bulbs under the ember bed, which generate the flames and embers, and two (2) bulbs above that illuminate the firebox interior.
Lower Light Bulb
Requirements
Quantity of three (3) clear chandelier or candelabra bulbs with an
Do not exceed 60 Watts per bulb.
Helpful Hints: It is a good idea to replace all light bulbs at one time if they are close to the end of their rated life. Group replacement will reduce the number of times you need to open the unit to replace light bulbs.
To access the lower light bulb area:
1. Carefully remove the front
Figure 9
Upper bulbs Flicker rod
Glass media and tray 
Front Glass
Assembly
glass assembly. Be aware that some of the glass media may fall out of the tray (Figure 9).
2.Empty the tray of glass media.
CAUTION: Handle glass media with care as some pieces may have sharp edges.
3.Lift the tray up and remove from firebox.
4.Pull flicker rod towards the motor and bend gently to remove the opposite end from the support bracket (Figure 10).
5.Remove flicker rod from motor (see Figure 10).
6.Unscrew bulb(s) counter clockwise.
16 | www.dimplex.com |
