Desa 50 owner manual Unpacking Assembly, Tools Needed

UNPACKING

ASSEMBLY

(For 35, 50, and 70 Models Only)

1.Remove all protective packaging that has been applied to heater for shipment

2.Remove heater from carton.

3.Check heater for any shipping damage. If damage is found, promptly inform dealer where heater was purchased.

These models are furnished with a nose cone guard. Nose cone guard and mounting screws are found in the shipping carton.

Tools Needed

• 5/16" Nut Driver or Wrench

1.Place nose cone guard on top of upper shell flange. Make sure nose cone guard is on hot air outlet end of heater.

2.Insert screws through nose cone guard and upper shell flange.

3.Tighten screws firmly.

Nose Cone Guard

Screw

Hot Air Outlet

Upper Shell

Flange

ASSEMBLY PFA/PV 042B

Figure 3 - Nose Cone Guard Assembly, 35/50/70 Models Only

099618

5