8
FUELS
VENTILATION
OPERATION
WARNING
Use only kerosene or No. 1 fuel oil to avoid risk of fire or explosion. Never use gasoline, crankcase drainings, naph- tha, paint thinners, alcohol, or other highly flammable fuels.
Use only kerosene or No. 1 fuel oil. Do not use heavy fuels such as No. 2 fuel oil or No. 2 diesel. The use of heavy fuels will result in:
•clogging of fuel filter and nozzle
•carbon build up on spark plug
•the need of
Do not use No. 3 fuel oil or heavy oils such as crankcase drainings. These heavy oils will not ignite properly and will contaminate the heater.
IMPORTANT: Use a KEROSENE ONLY storage container. Be sure storage container is clean. Foreign matter such as rust, dirt or water will cause the heater’s safety control to shut down heater. Foreign matter may also require heater’s fuel system to be frequently cleaned.
WARNING
Provide a fresh air opening of at least one square foot (930 square cm) for each 35,000 BTU/HR rating. Provide extra fresh air if more heaters are being used. The minimum ventilation requirements must be followed to avoid risks associated with carbon monoxide poisoning. Make certain these requirements are met prior to operating heater.
Example: A 150 model heater requires one of the following:
•a
•a
•two,
IMPORTANT
Review and understand the warnings in the Safety Information Section. They are needed to safely operate this heater. Follow all local ordinances and codes when using this heater.
To Start Heater
1.Fill fuel tank with kerosene or No. 1 fuel oil.
2.Attach fuel cap.
3.Follow all ventilation and safety information.
099618
