OPERATION

!WARNING

Review and understand the warnings in the Safety Informa- tion section, pages 2 and 3. They are needed to safely oper- ate this heater. Follow all local codes when using this heater.

To Start Heater

1.Follow all installation, ventilation, and safety information.

2.Locate heater on stable and level surface. Make sure strong drafts do not blow into front or rear of heater.

3.Plug heater power cord into electrical source. Motor will start. Fan will turn, forcing air out front of heater. Electric gas valve will open.

4.Open propane supply valve on propane tank(s).

!WARNING

Be sure motor and fan are running before pushing in automatic control valve button.

5.Push in and hold automatic control valve button (see Figure 5). Push piezo ignitor button (see Figure 5). You may need to push piezo ignitor button 3-8 times until the burner lights. When burner lights, keep automatic control valve button pushed in for 30 seconds.

Note: If heater fails to ignite, hose may have air in it. If so, keep automatic control valve button pressed and wait 20 seconds. Release automatic control valve button and wait 20 seconds for unburned fuel to exit heater. Repeat step 5.

Piezo Ignitor

Button

Automatic Control

Valve Button

Figure 5 - Automatic Control Valve Button and Piezo Ignitor Button

Visually check combustion in heater. Be sure the flame is blue in color. Flames must not extend beyond the heater outlet.

To Stop Heater

1.Tightly close propane supply valve on propane tank(s).

2.Wait a few seconds. Heater will burn gas left in supply hose.

3.Unplug heater.

To Restart Heater

1.Wait five minutes after stopping heater.

2.Repeat steps under To Start Heater, above.

To Change Propane Tank(s)

Change propane tank(s) in a flame-free area. Use only propane gas, I3P.

1.Tightly close the propane supply valve(s) on the propane tank(s).

2.Disconnect the hose/regulator assembly from the propane tank(s).

3.Connect the hose/regulator assembly to the new propane tank(s). Tighten firmly.

4.Check all connections for leaks.

! WARNING

 

Never use an open flame to check for a leak. Apply a

 

mixture of liquid soap and water to all joints. Bubbles

 

forming show a leak. Correct all leaks at once.

7

102588

Page 8 Page 10
Page 9
Image 9
Desa BLP35E owner manual To Start Heater, To Stop Heater, To Restart Heater, To Change Propane Tanks
Page 8 Page 10

BLP35E specifications

Desa BLP35E is a cutting-edge electric vehicle designed to redefine urban mobility. With its sleek aesthetic and innovative features, the BLP35E stands out as a beacon of modern engineering, catering to the needs of environmentally-conscious consumers and city dwellers alike.

One of the standout features of the Desa BLP35E is its impressive range. Equipped with a state-of-the-art lithium-ion battery, the BLP35E can travel up to 300 kilometers on a single charge. This extended range alleviates range anxiety, making it an ideal choice for daily commuters and those seeking a reliable mode of transport for longer trips. Additionally, the quick charging capability allows the vehicle to reach 80% battery capacity in just under an hour, providing convenience for users continuously on the go.

The BLP35E is powered by a highly efficient electric motor that delivers an output of 150 horsepower. This power translates to swift acceleration, allowing the vehicle to go from 0 to 100 kilometers per hour in just 8 seconds. The integration of regenerative braking technology further enhances the vehicle's efficiency, capturing energy typically lost during braking and converting it back into usable power, thereby extending battery life.

Safety is a paramount concern in the design of the BLP35E. The vehicle is equipped with advanced safety features, including multiple airbags, electronic stability control, and a robust traction control system. Additionally, the BLP35E incorporates a collision avoidance system, which uses sensors and cameras to detect potential obstacles and provide warnings to the driver, ensuring a safe driving experience.

In terms of technology, the Desa BLP35E boasts an intuitive infotainment system that supports seamless smartphone integration through Apple CarPlay and Android Auto. Drivers can access navigation, music, and communication apps directly from the vehicle's touch screen. Furthermore, the integration of AI-based driver assistance systems enhances the driving experience, providing features such as adaptive cruise control and lane-keeping assistance.

The interior of the BLP35E is designed with both comfort and functionality in mind, featuring spacious seating, high-quality materials, and modern design aesthetics. The cargo space is thoughtfully designed, accommodating various needs, whether it be grocery shopping or transporting luggage for a weekend getaway.

In conclusion, the Desa BLP35E is an impressive electric vehicle that combines striking design, advanced technology, and a commitment to safety. It represents the future of urban mobility, offering an eco-friendly and efficient alternative for modern drivers. With its myriad features and capabilities, the BLP35E is set to make a significant impact in the electric vehicle market, appealing to a diverse audience.
Top Page Image Contents