SAFETY INFORMATION
Continued
10.To prevent possible fire, do not block air intakes in any manner.
11.A heater has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint or flammable liquids are used or stored.
12.Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock or injury to persons.
13.Avoid the use of an extension cord because the extension cord may overheat and cause a risk of fire. However, if you have to use an extension cord, the cord should be No. 14AWG minimum size and rated not less than 1875 WATTS.
14.Always use properly grounded fused and polarized outlets.
15.Always use ground fault protection where required by electrical codes.
16.Always disconnect power before performing any cleaning, maintenance or relocation of heater.
17.To prevent a possible fire, do not burn wood or other materials in this heater.
18To prevent electric shock or fire, always use a certified electrician should new circuits or outlets be required.
19.When transporting or storing heater, keep in a dry place free from excessive vibration and store as to avoid damage.
LISTING APPROVALS
This heater has been tested in accordance with the CSA Standards for fixed and
If you need assistance during installation, please contact your local dealer or the DESA Heating Products Technical Services Department at
Model: | CEF26BN |
Description: | 26" Fireplace/Insert |
Voltage: | 120 |
|
|
Watts: | 1500 |
|
|
Amps: | 15 Amp |
| Grounded Circuit |
|
|
Note: This heater must be electrically wired and grounded in accordance with local codes or, in the absence of local codes, with National Electric Code ANSI/NFPA
PRODUCT DIMENSION
SPECIFICATIONS
26.125
22.75
21.26
21.125
4.33
13.25
12.0
Figure 1 - Heater Dimensions
www.desatech.com | 3 |