OPERATING

INSTRUCTIONS

Continued

8.To turn off the fireplace, press the POWER ON/OFF button once. When you hear the beep, the fireplace will be completely off and the flame will disappear. When you re- start the fireplace with the remote control, all of the features you had set will remain in effect.

NOTICE: This remote control must remain within 8 meters or 26 feet of the fireplace to be effective.

IMPORTANT: If the flame does not acti- vate after the POWER ON/OFF button is pressed, press the DISPLAY ON/OFF button to activate the flame. If the flame does not appear, repeat step 4, page 8.

CLEANING AND

MAINTENANCE

WARNING: Always discon- nect power and allow the heater to cool before performing any cleaning, maintenance or reloca- tion of this heater. Turn controls to OFF and remove plug from outlet or turn off circuit breaker to heater.

Turn off heater and circuit breaker to heater before performing any cleaning and/or maintenance. Al- low heater to cool completely.

CLEANING FIREBOX

COMPARTMENT

1.Remove screw and glass retainer clip from front of glass. With gloves and safety glasses, remove the glass front by tilting top out and lifting up on glass. Place glass on smooth soft surface to avoid breakage.

2.Using the brush vacuum attachment, gently clean compartment.

3.After cleaning compartment, replace glass or screen and front face. Reset circuit breaker.

BACK GLASS

1.The glass is cleaned in the factory during assembly. During shipment, installation, han- dling, etc. the glass surface may collect dust particles. These can be removed by buffing lightly with a clean dry cloth.

2.To remove fingerprints or other marks, the glass can be cleaned with a damp cloth using a good quality household glass cleaner. The glass should be completely dried with a lint free cloth or paper towel.

3.In the event of glass breakage, vacuum all remaining glass pieces with a shop vac. DO NOT VACUUM WHILE PIECES ARE HOT. Replace glass only with replacement part specifically for this heater. Never substitute material. Only fully tempered soda lime safety glass may be used on this heater.

BULB REPLACEMENT

WARNING: The halogen light bulbs in your unit can become extremely hot. Allow at least 10 minutes between turning off the heater and removing the light bulbs to avoid accidental burns.

There are a total of 6 halogen light bulbs (type GX6.35 rated 120 volts, 20 watts or 35 watts) in your unit.

•2 bulbs provide illumination for the ember bed beneath the log set

•2 bulbs provide illumination for the flame generation assembly

•2 bulbs for replacement

WARNING: Do not install replacement bulbs that exceed specified maximum watts.

Your fireplace unit must be opened in order to replace the light bulbs. To reduce the number of times you need to open the unit, replace all bulbs at the same time.

Ember Bed Bulbs

1.Carefully remove glass (see step 1 under Cleaning Firebox Compartment).

2.From the bottom, gently pull forward and lift up log set ember bed until front edge clears the front of the unit (do not pull up on logs).

3.Remove spring clip. Hold socket and pull out the old bulb.

Spring Clip

Bulbs

Figure 6 - Ember Bed Bulb Location

116863-01B

www.desatech.com

9

Page 8 Page 10
Page 9
Image 9
Desa CEF26BN warranty Cleaning Maintenance, Cleaning Firebox Compartment, Back Glass, Bulb Replacement, Ember Bed Bulbs
Page 8 Page 10

CEF26BN specifications

Desa CEF26BN is a remarkable innovation in the realm of energy-efficient home heating solutions. Designed with the modern consumer in mind, this product combines cutting-edge technology with user-friendly features to elevate indoor comfort while minimizing energy consumption.

One of the primary characteristics of the CEF26BN is its sleek and compact design, which allows it to blend seamlessly into any room decor. Whether you are looking to heat a small living space or a larger area, this model offers versatile installation options, including wall mounting and free-standing configurations. The device is ideally suited for homes, offices, or any setting requiring reliable and efficient heating.

At the heart of the Desa CEF26BN is its advanced heating technology, featuring a state-of-the-art ceramic heating element. This technology provides quick and even heat distribution, ensuring that every corner of the room reaches the desired temperature without the common hot and cold spots associated with traditional heating methods. The ceramic heater boasts durability and longevity, making it a robust choice for long-term use.

Energy efficiency is a standout feature of the CEF26BN. This model incorporates several smart technologies, including programmable thermostats and energy-saving modes that automatically adjust heating levels based on occupancy and time of day. Users can set specific heating schedules, allowing for personalized comfort that aligns with their lifestyles while also helping to reduce utility bills.

In addition to its heating capabilities, the Desa CEF26BN prioritizes safety. It is equipped with multiple safety features, including overheat protection, tip-over shut-off, and cool-touch housing. These features provide peace of mind, making the CEF26BN a secure choice for families with children or pets.

The intuitive control panel is another highlight, featuring user-friendly buttons and an LED display that make it easy to adjust settings. Remote control options enhance convenience, granting users the ability to control their heating preferences from anywhere in the room.

In summary, Desa CEF26BN is an ideal choice for anyone seeking a powerful, efficient, and safe heating solution. With its combination of modern design, cutting-edge heating technology, and an array of safety features, the CEF26BN stands out as a reliable option for creating a comfortable living environment, all while being mindful of energy consumption. Whether you face chilly winter nights or a cool office environment, this heater promises to deliver warmth and comfort where it is needed the most.
Top Page Image Contents